Electronics Forum | Thu Sep 19 11:11:21 EDT 2013 | northstarmfg
I would be looking at used or refurbished equipment with that budget. We had a similar budget a few years back and ended up purchasing a rebuilt pick & place machine. We have been extremely happy with the results Don't forget that you will need t
Electronics Forum | Tue Feb 25 14:39:20 EST 2014 | nicodj77
Stellar Technical Product, we been ordering from them for almost 6 years. My needs where to be used with connectors or power modules on a tray without pick up area (dots) for pick up Fuji nozzle of 5mm. There is no P/N because is a special order, b
Electronics Forum | Tue Feb 11 12:44:32 EST 2014 | cyber_wolf
Jigo, We have never had a need to do internal testing on solder paste, and your paste supplier should be able to tell you what the correct operating temperature range is. All of the big names in solder paste have tight quality control and I suspect t
Electronics Forum | Fri Apr 04 15:39:27 EDT 2014 | davef
I’m not going to do your job for you. Here are some links to get you started: * http://www.fda.gov/ICECI/Inspections/InspectionGuides/InspectionTechnicalGuides/ucm081273.htm * http://www.instructables.com/answers/how-to-identify-the-leakage-of-elect
Electronics Forum | Tue Feb 24 09:56:03 EST 2015 | akashicind
Hi, It depend on your budget,try to buy those maker can support spare & service . No meaning you buy high end machine but no service support. Try to find regional agent can support on call upon machine break down. Also other factor hand
Electronics Forum | Fri May 01 04:10:35 EDT 2015 | dberenguer
We recently purchased a Quadra Laser P&P machine from another company. The machine is in good conditions and we've been able to test most of the hardware functions of the machine, including fiducial recognition, feeders and header exchange. We feel
Electronics Forum | Thu Aug 27 09:18:57 EDT 2015 | fcmtechnician
Hi Don't know your reflow brand, but try to decrease the blower speed...is possible that air blow out the componets! For vibration, chain related issue, etc open your hood and start the oven in colder recipe with pcb inside! ( put the service key o
Electronics Forum | Mon Dec 14 10:51:02 EST 2015 | dyoungquist
We have a two Heller ovens, 1707EXL (2006) and 1707MK III (2014). We use them for lead and lead-free reflow soldering including all the tricky components such as BGAs. You may want to go with 8 or 9 zones if you are running high volume but a 7 zone
Electronics Forum | Mon Jul 11 17:49:53 EDT 2016 | davef
Measurement Specialties purchased RTD Company, Inc. [ http://www.meas-spec.com/rtd-company.aspx ] in October 2012 and has maintained the primary site and staff in Minnesota. We continue to be a technological leader in the design and manufacture of e
Electronics Forum | Thu Aug 04 13:58:20 EDT 2016 | sumote
Does anyone have the technical specifications for the Fuji CP6 and the Fuji IP3? Looking for the placement speed (parts per hour), accuracy, smallest/largest component size, fine-pitch (what size it can do). Our new sales guy is putting together some