Electronics Forum | Tue Jul 19 09:14:49 EDT 2011 | kahrpr
All I can tell you about what people do with solder paste at the end of the day or for the weekend is. What the manufacturer recommends. What people say in public? What companies actually do as far as reusing it? I am not passing judgment on 1 or 3
Electronics Forum | Fri Jul 22 18:22:36 EDT 2011 | garym4569
We have a inline YesTech YTV-2000 in a newly configured SMT line and having issues with the transfer system. Shortly after the unit is put in run mode, the conveyor will turn on and run as if it is attempting to load a pcb even though no pcb availab
Electronics Forum | Fri Aug 12 09:07:23 EDT 2011 | rway
The rails are being sourced by the regulators. Rails, bus, you can use them interchangeably. As far as what voltage? I have no idea other than my assumptions listed above, but more than likely you will have +/-12V and 5V. Depending on the age of t
Electronics Forum | Wed Aug 31 14:32:12 EDT 2011 | cbeneat
We run 3 XPM2's. All were new so under warranty, but I've found the support to be excellent over the years. They have moved their operation to MO recently, time will tell if this is an issue. The only maintenance issue I've run into is on our oldest
Electronics Forum | Sat Sep 24 16:06:13 EDT 2011 | tech1
Okay so you are picking from a Wafer Frame and it is a UV cured tape. Who's die sorting machine are you using? You mention the ejector needles, but have you checked them? What size are the die and how thick are they? Have you checked the UV cure, i
Electronics Forum | Thu Nov 03 12:59:42 EDT 2011 | davef
We agree Evtimov that the best way to evaluate AOI is to test known good and known bad boards on a machine, preferably in your own plant. Be aware that I can run all of your boards and assure you that there will not a single false call. It's just th
Electronics Forum | Tue Nov 08 07:23:03 EST 2011 | leemeyer
Thanks Bobpan, A function 6 tells me that I have firmware ver IVC 3.05. I keep getting a motor error 4 "The Xand/or Y axis did not reach the commanded position within 500 msec." The battery was dead on this machine so the mod codes were lost. I en
Electronics Forum | Wed Nov 09 12:50:25 EST 2011 | dyoungquist
I've never run D.I. water through an ultrasonic humidifier before. I think the reverse osmosis (RO) process removes more stuff (minerals and etc.) than the D.I. process does. My experience from using one in a home setting still tells me that is the
Electronics Forum | Sun Nov 20 18:15:24 EST 2011 | xborre
Hello, We are about to buy a old used Dima Optimat P&P I have already read the manual to know more about the possibilities. I have read it can place SOT23 packages, but i'm currious if it can recognize and place also the 5 pin variant (SOT23-5) and
Electronics Forum | Tue Jan 24 21:30:09 EST 2012 | jorge_quijano
It means the machine places another component, no missing PCBs are built. As an update I have measured this % in the newest machine and it is below 1%, but in our worst machine (old quad) it is as high as 9% for a small batch of 10 boards (~15 comp p