Electronics Forum | Tue Mar 03 16:14:37 EST 2015 | lokit
Hello, No experience with Mirtec, they are more populair in the States and Asia it seems. For my company, not only the inspection depth and reducing false fails was important, but also good costumer support. Keep in mind that if you have problems w
Electronics Forum | Wed Jun 17 17:06:29 EDT 2015 | swag
Awesome! It's good you found feeder teach. One warning: feeder teach is not slot specific (at least not when I ran GSM). Example: You teach an 8mm feeder in slot 30. You then teach an 8mm feeder in slot 31. The pick will change for the slot 30
Electronics Forum | Mon Aug 10 15:34:00 EDT 2015 | rgduval
This issue has been haunting me for a little bit, but, it is now starting to really affect running boards. I'll be in the middle of a run, and have a feeder issue, and the GSM will identify the feeder. I'll review the issue (jammed tape, no part av
Electronics Forum | Wed Apr 06 08:54:35 EDT 2016 | spoiltforchoice
Essemtec like to keep some details to themselves to make you initiate contact but the Jet nozzle page states it can do 0.4mm dots. Last I checked a single Jet dispenser was about £15k GBP, the Scorpion machine itself is effectively the same platform
Electronics Forum | Tue Nov 22 21:57:17 EST 2016 | Miche
Hello Dears, I'm a small CS Engineering at Taiwan.There are some problem on DIMM connector area with poor solderability at ODM. It was random on Dimm connector area and the SMT area is fine. At the same time, there were other PCB vendor's product whi
Electronics Forum | Fri Dec 23 15:35:19 EST 2016 | aemery
Westshored; Not sure how helpful I can be as there are details missing from your description. So I will try and give you some requirements that may help us sort this out. The Speedline UPGR was UPGR-026 and 027, depending on the machine type. The
Electronics Forum | Tue Mar 28 19:28:54 EDT 2017 | aemery
Giao, These style of MPM's use stepper motors, but no feedback like an encoder or a resolver. In other words all axis positions are assumed after "Reset" of the machine. Because of this style of drive system there is the potential for the vision ga
Electronics Forum | Tue Jun 13 16:53:35 EDT 2017 | sean87
For many moons, I have used IPA for our cleaning > tanks within out DEK systems. Now we have a new > engineering team and he would like to try a > stencil cleaning solution (DEK PRO XF). Can > everyone tell me there pros and cons of using > each
Electronics Forum | Thu Aug 10 13:26:02 EDT 2017 | dleeper
In my past life, I worked at a CM that used Mirae "Meridian" machines Universal Instruments "Genesis" machines. The universal instruments machines were much, much faster. What sort of head configuration did your Advantis machines have? The 30 spindl
Electronics Forum | Thu Jun 21 09:02:40 EDT 2018 | spoiltforchoice
I'd be tempted to say you buy whatever is most consistent with what you paid for the rest of the machine.... And if you can source Chinese copies& they aren't expensive it can't hurt to try a few. More generally (I don't know how these particluar ma