Electronics Forum | Wed May 08 09:49:17 EDT 2002 | Hussman69
Hello, We are experiencing a little problem of cutting feeder tape. When ever we place two or more 24 mm feeders together, the cutter on the machine will partialy cut the adjoining tape, or pull it out of sequence. The machine is a Panasonic MSR,
Electronics Forum | Sun Jun 23 12:24:37 EDT 2002 | stepheno
I worked at a place where a customer complained that the resistance of some components was lowered. It was found to be flux entrapped from the wave solder process. The tube of epoxy, didn't have a date of manufacture, shelf life, or use by date on
Electronics Forum | Wed Apr 30 20:33:15 EDT 2003 | davef
Haaaa!!!! Yes, we�ve seen things like that. We found that a high input impedance amplifier worked fine in a room with a controlled environment and worked poorly in the sweat-shop portion of our plant. We were using good ol� WS609, straight water w
Electronics Forum | Sat Jun 21 00:37:20 EDT 2003 | nifhail
Most of the capacitors & resistors supplier have implemented Leadfree finished on their components and like it or not, most of the PCBA house already using them in their process. I just got a notice from my component supplier telling me that they wil
Electronics Forum | Fri Jul 18 10:23:06 EDT 2003 | James
The parts adhere solder very well. It does not pertain to a certain part on the board either it is all over the board. I cant really say that it is oxidization all you can tell is that on certain parts of the pad still shows like white tin and that
Electronics Forum | Mon Jan 05 11:12:16 EST 2004 | gregp
Barney, Please tell me who it is that told you this customer cannot get support. Certainly it is not the customer himself. We have been at this customer with top level engineers at the drop of a hat from day one. As for the C7 it is part of the new
Electronics Forum | Thu Jan 29 16:10:09 EST 2004 | blnorman
Another equipment manufacturer is Smart Sonic. Most equipment manufacturers have their own chemistries, but they are also willing to use other cleaners. What we have done is to send boards that need to be cleaned to the equipment manufacturer. W
Electronics Forum | Thu Feb 10 14:27:07 EST 2005 | cyber_wolf
First of all, whom are you getting it from ? Mydata, or a used equipment broker. If you can tell me what machine type you are looking at, then I can tell you what to look for. (MY-series, or TP series) Most important things right off the bat: *Machi
Electronics Forum | Thu Jun 16 10:30:35 EDT 2005 | clampron
Good Morning Everyone, We have had an issue with a specific board house on a job that has bright tin plating. At one point, a lot recieved proved to be unsolderable. The plating looked OK but no wetting would occur at reflow. We hagled with the boar
Electronics Forum | Thu Sep 22 10:48:08 EDT 2005 | Rob
Cheers Greg, It's unusual to have such direct access to manufacturers & their opinions. I'll tell you what really does get us, and splicing doesn't work well on these occaisions - big SMD connectors, requiring deep pocket feeders. You only get m