Electronics Forum | Mon Nov 17 14:14:15 EST 2003 | blnorman
The main function of the test is to evaluate the solder mask. Basically you are testing three samples: #1 - No solder mask, #2 - solder mask without solder, and #3 solder mask with solder. The solder pot is used to apply solder to the patterns on O
Electronics Forum | Tue Jul 05 18:24:50 EDT 2016 | padawanlinuxero
Hi have you try to use some type of adhesive like loctite or a solder mask to avoid lifted components, we use both in 2 different products, we use loctite to avoid a hall inserted in a plastic carrier, lift when being solder in the solder wave, the s
Electronics Forum | Fri Oct 30 10:36:26 EDT 2009 | richie_puthotta
Hi, I see a huge solder mask shift on chip comp pads. This would result in mid-chip solder balls or solder beads. Overall, the solder mask workmanship is not acceptable. Mask is on pad.
Electronics Forum | Thu Aug 13 12:55:46 EDT 1998 | Dave F
| Hi, can you please tell me how to make green coating and through-hole plating of PCB? Thanks! | Xingsheng Xingsheng: Welcome. Bible on PCB fabrication: Printed Circuits Handbook, Clyde Coombs, McGraw-Hill Web resources: http://www.pwbrc.org/ a
Electronics Forum | Tue Apr 08 22:41:22 EDT 2008 | davef
Duno. Which LPI Solder Mask are you using?
Electronics Forum | Tue Aug 24 03:10:35 EDT 2010 | tennythomas
What is solder mask alignment?
Electronics Forum | Fri May 27 14:09:19 EDT 2022 | davef
No solder mask; Class 2 => Class T; Class 3 => Class H.
Electronics Forum | Mon Jul 01 20:45:38 EDT 2002 | davef
Solder mask thickness specifications by fabricators are: * Wet mask: 0.0002 ~ 0.0004� on trace * LPI mask: 0.0002 ~ 0.0008� on trace Liquids usually range between 10 to 13 um (0.00039 to 0.00051") when dried. Liquid resist processes I have seen are
Electronics Forum | Thu Feb 12 17:14:49 EST 2004 | Jim
Replying to mine own thread for clarification. We are having some issues with solder mask shifts on memory boards using fine pitch BGAs. At times the etch to etch distance does not leave room for a solder mask annular ring to be shifted or it will c
Electronics Forum | Tue Nov 13 22:40:02 EST 2012 | davef
I expect that suppliers can just about always hold solder mask registration within a true position of 3 thou. That's the old SMT padstack think ... make the solder mask openings extend 3 thou larger than the copper. That way, even if the copper and t