Electronics Forum: thin and ring (Page 1 of 6)

2 questions: via tenting and annular ring terminology.

Electronics Forum | Tue Jul 06 19:38:01 EDT 1999 | John

Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. Q #2) When speaking of annular rings, I have always thought of them as minimums. Su

Re: 2 questions: via tenting and annular ring terminology.

Electronics Forum | Wed Jul 07 00:28:59 EDT 1999 | Scott Cook

Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. John, It depends......mainly on the via size. Tenting works on smaller vias. Tent

Re: 2 questions: via tenting and annular ring terminology.

Electronics Forum | Wed Jul 07 10:25:13 EDT 1999 | John Thorup

Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. John, It depends......mainly on the via size. Tenting works on smaller vi

Re: 2 questions: via tenting and annular ring terminology.

Electronics Forum | Wed Jul 07 09:47:41 EDT 1999 | Peter Brant

Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. WIth regards to this question, and scott's follow up, I have used the "epoxy me

Re: 2 questions: via tenting and annular ring terminology.

Electronics Forum | Wed Jul 07 13:41:42 EDT 1999 | Dave F

snip If you go for plugging be sure you have a protrusion spec that you can live with. This often results in little bumps of epoxy that can interfere with component placement. For us, tenting .015 vias usually gets us about 80% coverage from

Conformal coating mask dots and halos

Electronics Forum | Thu Feb 25 07:37:42 EST 2010 | pcbrown

We are using Humiseal 1B31 and polyester dots for masking. We are spraying this in a Binks sprayer mixed at almost 1:1 with 521 thinner. Whe are seeing the coating creating thin halos around the poly dots as if the dots are "rejecting" the coating. T

BGA dead bug pick and place

Electronics Forum | Mon Oct 28 09:48:10 EST 2002 | gregp

If I understand correctly you want to pick BGAs from the ball side using some type of vacuum arrangement. You will find that the reliability of this is dependant on the size of the balls and the pitch. The larger the balls and tighter the pitch, th

BGA dead bug pick and place

Electronics Forum | Fri Jun 18 11:31:17 EDT 2004 | gregp

I think it depends on the thickness of the PORON sheet. For .3mm balls you could probably get away with a pretty thin sheet (maybe 1/16"). I don't know how thin it comes offhand. For the part you are describing I woulf try maybe a 3.5mm OD and a 1

Pick and Place Rivet

Electronics Forum | Wed Aug 13 09:20:05 EDT 2008 | wrongway

we tested this kind of part about 3 years ago did a few prototypes I did'nt know how it was going to work but our old amistar picked it and placed it just fine used a small nozzle with a o-ring on the end of it I think it did ok going across the wav

wave pallets and titanium

Electronics Forum | Tue Sep 11 12:56:03 EDT 2007 | jsloot

Can anyone give me any information on the longivity of titanium insert wave pallets. What I am looking for is the integrity of thin walls over several hundred cycles and the interface between the insert and the durostone material.

  1 2 3 4 5 6 Next

thin and ring searches for Companies, Equipment, Machines, Suppliers & Information

Digital Inspection Equipment

Best Reflow Oven
Free PCB Design Checker

World's Best Reflow Oven Customizable for Unique Applications


MSD storage in desiccant dry canbinets