Electronics Forum | Sun Feb 17 15:02:14 EST 2013 | leeg
Currently having trouble with the above machine, the display is showing the heat stage fluctuating between 80 (set) and 465....Any ideas?
Electronics Forum | Sun Feb 17 23:33:08 EST 2013 | mdang
Hi All, Is anyone out there has a CD of the FLEXA 4.6.1? Please let me know. Thanks, -Michael
Electronics Forum | Tue Feb 19 12:17:14 EST 2013 | emeto
Push the pedal and help yourself with a screwdriver to take the stencil out. Once you do that you can see clearly which side is not opening and closing. Than you just fix that side. Your instructions on how to do that should be with your spare hoses.
Electronics Forum | Tue Feb 19 13:49:15 EST 2013 | cbeneat
I appreciate the help, I tried a small amount of force, but I didn't want to trash the stencil, I got hold of the where we purchased it and they are going to repair, if they trash the stencil they will cut us a new one.
Electronics Forum | Thu Mar 07 10:48:37 EST 2013 | mpolak
Hi Chris, Get the stencil repair kit from DEK. P/N: 430886. It comes with tools and isntructions how to remove the stencil from frame. Regards Marcin
Electronics Forum | Wed Feb 27 19:40:21 EST 2013 | jaimebc
For yellow colored tantalum caps, try using Fusion light (P5. For pre process use green filter. Let me know if that works for you. I've had the best results with this setting.
Electronics Forum | Wed Feb 20 11:48:18 EST 2013 | jrr3434
Hi, does anyone know what kinds of inspection this aoi can perform? Solder joints, lifted leads, shorts, etc. Any information would be helpful. thanks.
Electronics Forum | Fri Feb 22 15:23:54 EST 2013 | tkotwal
Thank you for the advice. I have the same concerns with applying that much heat from a single point, so I will probably go with a Zephyrtronics preheater. Tom
Electronics Forum | Thu Feb 21 06:18:42 EST 2013 | cbeneat
We run 3 Vitronics XPM2's, our newest is 3 years, oldest is 6+ and I have not seen our rails warp the way you're describing. I would be plenty frustrated if I had to replace rails this often.
Electronics Forum | Thu Feb 21 08:52:24 EST 2013 | emeto
Currently having Elecrtovert and BTU - no problems with both. Before use to have Vitronics aand Heller - and no problems with the rails. However I had other problems with Heller which makes me think that they are going deeper with the bad quality par