Electronics Forum | Tue Mar 07 17:31:14 EST 2023 | ccouture
fluxer requires normal shop pressure, around 100psi. Thanks for the infos, very useful.
Electronics Forum | Tue Mar 07 18:18:11 EST 2023 | proceng1
The onsite generator drops approx. 30psi from the input. We feed ours 110psi and end up around 80psi in the tank, which we regulate to 65psi for the machines.
Electronics Forum | Tue Mar 07 18:51:47 EST 2023 | ccouture
Sounds right, our actual pressure in the system is 120psi, the regulated to 100 in the machines.
Electronics Forum | Tue Mar 07 20:33:26 EST 2023 | SMTA-72027903
Hello We have recently started to work with press fit but we are finding problems to reach the specifications in terms of hole deformation and whiskers. Do someone have experience in key process parameters and PCB design specifications (PCB harness,
Electronics Forum | Wed Mar 08 12:22:29 EST 2023 | ccouture
we don't have a nitrogen generator installed yet. The solder wave supplier recommends 99.99%. we hare received several submissions for nitrogen generators that meet the requirements.
Electronics Forum | Wed Mar 08 12:41:10 EST 2023 | proceng1
Agreed. If it's just a means of propulsion/ atomization the purity probably isn't too critical.
Electronics Forum | Wed Mar 08 12:42:03 EST 2023 | stephendo
For fun ask the sales guy where they came up with that number. Or even the reasoning for using nitrogen. Don't expect quality answers.
Electronics Forum | Thu Mar 09 20:55:08 EST 2023 | emeto
It looks like the plating and metalization were stropped off the component. I would suggest these are counterfeit parts. Are these Pb free parts and process?
Electronics Forum | Sat Mar 11 17:53:14 EST 2023 | recard
Duro. I have the exact same problem on a CP45. Did you solve the problem? Thanks.
Electronics Forum | Sat Mar 11 22:07:35 EST 2023 | recard
Hi Duro. The problem is that my VME card and ISA card was tested in another machine and both are working. So I suspect the CAN boards or Motherboard.
