Electronics Forum | Wed Jan 03 08:22:08 EST 2001 | G. English
Hi, all the best to you smt' netters for the forthcoming year. I am looking for a one stop shop for surface mount consumables, in particular, stencil IPA wipes, printer under screen cleaning rolls, gloves, dry wipes, squeegee blade replacements etc
Electronics Forum | Wed Jan 03 21:14:04 EST 2001 | Greenman
This is news to me that I seriously doubt. Couldn't be someone from the competition that told you this, could it? Tim Skidmore just got made Chair of the IPC Solder Paste Task Group, so if they're pulling out of solder altogether (to do what instead
Electronics Forum | Wed Dec 27 17:13:28 EST 2000 | John K.
As part of an Intel erratum, they changed their BGA coplanarity spec from .006" to .008". The package is 23 X 23 partial array, .050"(1.27) pitch, 1.220"(31) square. We apply paste onto BGA pads with a 6-mil stencil. From a process perspective, sh
Electronics Forum | Wed Dec 27 21:16:51 EST 2000 | Dave F
Expanding on Dason's suggestion ... 4 Waffle Tray Size 4a www.jedec.org/download/default.htm search for "registered microelectronic carrier". 4b JEDEC Publication 95, under the CO- and CS- standards. 4c Tray manufacturers [ie, Peak, Summit, Nepenthe
Electronics Forum | Fri Dec 22 17:25:00 EST 2000 | Dave F
I'd bet money our operators could use the wrong paste at the wrong time with out the slightest hesitance. This seems to be a fairly novel approach to making things complicated. I will admit I've heard of people talking about doing this, but I must
Electronics Forum | Thu Dec 21 19:24:25 EST 2000 | Alejandro Rodriguez Gallegos
Hi Sorry my poor english We have some problems with some componentes 0402 we recived by the manucterer oxide in the tape reells exactly in the bottom side to the reel I think the root cause is the oxide in the tapes rells What do you think? And ot
Electronics Forum | Tue Dec 26 11:26:00 EST 2000 | acahill
If you have a known problem with the parts, then Reject them back to the Vendor. It appears that you have a solderability issue. As for Tombstoning on 0402 chips, this could trace back to the stencil design and/or machine placement. Define Tombstoni
Electronics Forum | Thu Dec 21 17:17:36 EST 2000 | Lee
I was talking to a field rep. for Electrovert when they installed my last machine about bent fingers. He told me there was a aftermarket source for rigid fingers that were made out of a thermoplastic that would shear off rather than bend. Is there
Electronics Forum | Thu Dec 21 08:45:40 EST 2000 | Hussman
I've been asked to "heat up the oven profiles" to "burn off" the excessive flux so our vision equipment can inspect solder joints. 1. I am using Multicore SN 63 no clean solder paste. 2. We use CR Technology Vision Inspection. Before I get too
Electronics Forum | Thu Dec 21 04:27:31 EST 2000 | teohbengee
Need help urgently. Anyone can provide me some information or site on reliability test on PCB assembly like solder joint or anything. Some test like ERSA Test, SHMOO Test, Pull Test, Temperature cycle and humidity Test, vibration Test or any related