Electronics Forum | Thu Jun 27 08:48:08 EDT 2002 | yngwie
I was approached by the comp. suplier to change the capacitors that I currently used. No change in elect. charateristic, but only on : a) change of palladium to nickel base inner electrode b) outer electrode material i.e. from silver to copper. Que
Electronics Forum | Thu Jun 27 21:28:42 EDT 2002 | davef
You're correct that the Ni/Pd termination seems to have something to do with you solder balling. It could be related to the interaction between your paste and the Pd. I assume these are really 'fines' rather than 'balls'. Things that come to mind a
Electronics Forum | Sun Jun 30 20:00:56 EDT 2002 | redmary
the SOIC encounter solder crack after reliability test, the common process is: SMT---manual soldering---IPT(in process test)---potting---T/C(thermal cycling,only add current and voltage)---B/T and F/T (burn in and functional test). the condition is 2
Electronics Forum | Mon Jul 01 00:09:47 EDT 2002 | Ben
Hi all How can I clean the white residue between QFP 0.5 mil Pitch? The white residue was created from mistake adding liquild No-clean flux Lonco 23F for reworking clean board. I can clean almost of it by using EC7M cleaning solvent except between
Electronics Forum | Mon Jul 01 22:24:10 EDT 2002 | Por
Thanks for your advise Normally, We do not add any liquid flux (clean or No-clean) during touch up process but this case is an error. Lonco 23F is Nc flux. but our board is clean. However, there are 6 boards that found the white residue and our
Electronics Forum | Tue Jul 02 12:33:32 EDT 2002 | Mike Konrad
We have had success removing white residue. A change of chemical (PCB-Wash or Vigon A200) have a good track record in removing white residue. As Dave stated, we (and others) operate a contract cleaning service. Contact me offline and I�ll provide
Electronics Forum | Mon Jul 01 16:15:02 EDT 2002 | Matt Kehoe
We are currently trying to gather information pertaining to applying LPI soldermask thicker than normal. The thick coating is necessary for the SIPAD ssd process however, because of the numerous brands of mask and application methods there is no sing
Electronics Forum | Wed Jul 03 19:17:54 EDT 2002 | davef
I prefer 'YAUC' [Yet Another Unit Converter] by Marius Miller. YAUC converts between many units - Metric, Imperial and others. It supports 585 units, in 40 categories, including Acceleration, Angle, Area, Current, Density, Energy, Force, Frequency
Electronics Forum | Tue Jul 02 16:04:08 EDT 2002 | russ
We normally disregard what the "tech" sheets say. A lot of it has to do with your printer settings, prints per hour, placement time, stencil cleaning procedures etc... Just another wrench to throw in, We have noticed lot to lot paste differences al
Electronics Forum | Wed Jul 03 07:29:05 EDT 2002 | jax
Where did you find this article about "U-shape" apertures? I believe it is simply talking about rounded corners on the inside of a normal square aperture. ( resembling a filled in U ). It kinda follows the same ideas behind the home-plate design, wit