Electronics Forum | Sat Jun 05 14:20:10 EDT 2010 | davef
It's a common problem. Try using a different needle diameter. Paste type||Suggested needle size II||21 or larger III||23 or larger IV||25 or larger V||27 or larger VI||30 or larger Additionally, improper clearance between the auger pump screw and t
Electronics Forum | Tue Jun 15 19:14:51 EDT 2010 | hegemon
You also need to consider the total metal load in your dispensable paste. You'll need a slightly higher flux content and less metal, say around 87% total metal, in a 4 or 5 mesh size. We had to have some special mixes made in order to do fine pitch
Electronics Forum | Tue Jun 08 16:27:29 EDT 2010 | eezday
what type of turn times are you requiring? I don't want to get too far away from your topic but I want to suggest that it might be easier to continue your search for a fast turn manufacturer then it is to embark on the arduous task of putting togeth
Electronics Forum | Tue Jun 08 18:25:47 EDT 2010 | smtmax
Hi Danny, Are you doing lead free? If yes, I would consider the AE-R330A or SMT-2010 lead free reflow oven. Our reflow oven is affordable and brand new. Just want to make sure what size is your board. Also, all of our equipment comes with one year s
Electronics Forum | Tue Jun 08 19:13:03 EDT 2010 | vmorina
Hi Vee, I thank you very much for the reply,and yes everything is ROHS. I am reading over the manual and looking at the differences between them. I also have a questions for you regarding stencils for BGA and other types of packages. Do you know any
Electronics Forum | Wed Jun 09 03:29:20 EDT 2010 | whitewing
I've just ordered one of these, which appear to be about the cheapest. Widely used for reflowing BGAs on faulty Playstations apparently. I'll report on how well it works once I get it. http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=
Electronics Forum | Wed Jun 09 11:41:25 EDT 2010 | smtmax
Hi Danny, I would suggest a laser-cut stencils w/ anti static polymer film. For more information on the stencil you should consider engineering lab. They provide high quality stencil for a reasonable price. If you can find a laser-cut stencil for a
Electronics Forum | Wed Jun 09 14:41:12 EDT 2010 | ronchap200027
Has anyone had issues with Renco inductors failing. The component I'm having problems with is a 330uH shielded power inductor. Out of 36 board failures, I have 17 that failed because this inductor failed. Most often they end up reading -1.34 uH.
Electronics Forum | Thu Jun 10 06:15:45 EDT 2010 | muarty
We currently have a project requiring us to place multiple QFN devices (of various sizes). The pick an place is not a problem at all, where we are seeing 'problems' is that 3 of the devices are being place on locations where the ground pad have plugg
Electronics Forum | Mon Jun 14 08:50:56 EDT 2010 | whitewing
Just been quoted GBP500 for 5kg (2.7L) of Galden LS-230. Don;t know if the lower temp non-leadfree stuff is cheaper If anyone in the UK has a small qty they'd sell me for experimentation, (e.g. old non-leadfree stuff they no longer use) please get in