Electronics Forum | Fri Jan 17 03:47:22 EST 2020 | miroyu
Hi everybody I will need hel in regard of file form , since my LUNA 800 MDC machine (newer version of ECM97) need it to run . I have this machine without PC that was comming with the machine. To make long story short now I am in need of kp50mdc.mtf
Electronics Forum | Fri Jan 17 09:17:49 EST 2020 | sumote
Hello all. We recently purchased a DEK Hroizon to replace our aging 265 machine. The 265 had an auto-loading stencil setting known as a "Distance To Image" where it would place the stencil directly over the board. The Horizon 2 has no such feature.
Electronics Forum | Fri Jan 17 09:34:22 EST 2020 | emeto
It looks like you have a simple version of the Horizon. You should have a scale on the right side with a stopper. When you create a new program you will define where the stopper should be. I used to same this value in the program description field, s
Electronics Forum | Mon Jan 20 03:13:34 EST 2020 | silverlead
Included screenshots from DEK manual, outlining stencil depth adjustment. Basically, distance from rear of the stencil to the front of the image is value needed to be set on scale when positioning stencil. There is an other way to adjust stencil, by
Electronics Forum | Mon Jan 20 17:26:07 EST 2020 | sumote
I see what the issue is now. A previous owner has removed the slider from the machine. I can see where it was mounted (bare metal where it was originally mounted as opposed to the black paint/powder coat). Is this slider available to purchase to re
Electronics Forum | Tue Jan 21 08:49:42 EST 2020 | emeto
I am sure you can upgrade it with DEK and it should not be so expensive. You can also ask them the price of the auto system. This is an arm(controlled by cylinder I think) and software to control it. This one moves the stencil in place when you load
Electronics Forum | Sat Jan 18 12:53:01 EST 2020 | vae_tva
I have a PM-570 / KP-620 that looks to be stuck in the production screen. It asks to press the start button, but when doing this nothing happens ... Can someone please help? Maybe I forget a step? When I look to the data everything looks to be OK. Fi
Electronics Forum | Tue Jan 21 06:53:05 EST 2020 | ameenullakhan
Dear Experts, Need your suggestion on the minimum tension to be maintained in the SMT stencil. Presently we are maintaining the 30 - 50 N/cm2 at the 4 corners of the stencil. And not considering the center of the stencil into consideration.. Is t
Electronics Forum | Tue Jan 21 16:11:05 EST 2020 | dgiordano
3.3.5.1 HIC Placement states "The HIC may be placed anywhere in the MBB, but should not be placed under, on top or touching a desiccant pouch." How do you assure that the HIC doesn't touch the desiccant pouch? Do you secure the HIC to the reel or to
Electronics Forum | Thu Jan 23 08:31:44 EST 2020 | dontfeedphils
I've had to order the PCB and stencil from aftermarket sources in the past, but I can't find the info anywhere on the stencil/hole grid. All I have is this manual. I believe I actually rented the PCB/stencil from PPM, then ordered my own replacemen
