Electronics Forum | Mon Aug 01 20:04:25 EDT 2022 | jdengler
Since you can make it work with unique names for the component on each feeder but not when they are the same it is going to be a system limitation. Possibly a different software version might allow it but you would need to find someone that has done
Electronics Forum | Wed Aug 03 07:29:03 EDT 2022 | pradeep14
Hi, We are facing the issue with Component orientation(Wrong orientation), during Proto build/NPI time in SMT for 1st board placement. We are not doing 1st board with STICKY board, directly placing the components with Paste board only. Pls suggest, H
Electronics Forum | Wed Aug 03 13:06:51 EDT 2022 | proceng1
I am a little lost on some of that, but here is what we do. The camera view has the package outline, including an orientation indicator. The operator has the camera step through the program, and checks that the outline and indicator are correct on
Electronics Forum | Thu Aug 04 19:00:25 EDT 2022 | SMTA-64386637
I am investigating the use of conductive epoxies to connect battery leads, Charging pins and wires inside small plastic housings. Soldering in these small spaces can create heat related defects in the plastics even when using low temp solders. Are
Electronics Forum | Mon Aug 08 14:28:18 EDT 2022 | davef
While IPC-A-610 [ https://www.ipc.org/TOC/IPC-A-610G.pdf ] is a good starting point for establishing your inspection requirements, there is no requirement for using a specific tool to make a measurement. You need to choose the microscope, AOI, loop,
Electronics Forum | Mon Aug 08 20:27:34 EDT 2022 | stephendo
It depends on what you will be building and your customer`s requirements. You many need an X-ray machine. You will almost certainly want magnifier lenses with ring lights. And you will probably never have enough binocular microscopes. You will also
Electronics Forum | Thu Aug 11 20:03:41 EDT 2022 | SMTA-69946521
I have a question about Humidity Indicator Cards (HIC) in sealed PCB packages. If a PCB package is temporarily opened where the HIC card indicates 20% humidity exposure and then the PCB package is resealed with a new HIC card. How is the 20% moisture
Electronics Forum | Fri Aug 12 05:24:35 EDT 2022 | ttheis
We recently parted out a GSM machine that we could not get operational. As parts came off of the machine it looked like the frame would make the world's strongest welding/work table. We stripped the frame bare and flipped it over instead of scrapping
Electronics Forum | Thu Jul 07 06:10:46 EDT 2022 | reuzzz
Update 11-08-2022: I found it! I'm searching for the technical manual with schematics of the Sefelec / Eaton SXS 506 dielectrical HV tester. Not the operating manual. I can't find it on the Sefelec / Eaton website. I've also tried to contact custome
Electronics Forum | Sun Aug 21 15:35:22 EDT 2022 | zadir
good afternoon, please tell me, maybe someone has encountered a problem on the juki 730/740 machine.we have a 24 volt 10 amp power supply broken on it (it stopped turning on completely) we changed it, but now stanou can't find the zero point, he come