Electronics Forum | Wed Dec 13 04:22:58 EST 2023 | ttheis
We print 1/2" x 1" labels via desktop thermal printer for many different applications both product and internal. Fairly easy to whip up a C# or similar program to print what you need on the labels. We wrote a program that has some predefined text for
Electronics Forum | Wed Dec 13 15:19:32 EST 2023 | hhudson
It has been happening in the mornings, and we do have a weak middle element, but our temp is always above 60C. we have it set at 65C. the service manager for the machine assured us that temperature wasn't the issue. Also, our flux application for ERS
Electronics Forum | Wed Dec 13 18:54:59 EST 2023 | hhudson
Good Afternoon, I was wondering if anyone knew what a calibration table is for an ionograph? I have a customer asking for one and am unsure. My first though would be a table that correlates SIR values and converts them the ug/NaCl equivalence? Can s
Electronics Forum | Fri Dec 15 11:24:54 EST 2023 | dimamalin
Hello! I want to inquire about settings for MPM printers with the Camalot inside system. We will use Koki JU-R45 adhesive and Koki S3X58-M406-3 solder paste with a 21ga needle. If anyone has a similar system, could you please share the initial parame
Electronics Forum | Mon Dec 18 14:11:02 EST 2023 | erikfriesen
Has anyone ever replaced the venturi vaccum pump on the CP45 or other series machine? Or used a centralized vaccum system? It works fine, but air consumption seems excessive. This is what is in there, it probably uses 10cfm at least. https://www.p
Electronics Forum | Mon Dec 18 19:31:33 EST 2023 | kojotssss
Surely somewhere the cleaning or rinsing liquid gets to the other chamber. It is possible that the chemical migrates to the flush or flushes the chemical into the chamber. I have had a similar situation, high foam, injection vertical spray offline st
Electronics Forum | Wed Dec 20 20:24:45 EST 2023 | ronh22
Looking for some Recommendations for a Selective Solder machine. We currently have a KISS103 no pre heater. We are high mix low volume, so batch is most like best option. I have used Pilerhouse Jade MKII years ago. Wondering what other option pe
Electronics Forum | Thu Dec 21 11:50:55 EST 2023 | bobpan
Not many people use the vision on spin failure for 0402 parts. I would focus on repeatably picking the part from the feeder. If you insist on using vision then maybe you can take a permanent marker and darken the nozzle tip. Dont use a sharpie as it
Electronics Forum | Fri Dec 22 16:28:07 EST 2023 | jeana
I've tried yesterday, I've spray painted a XF nozzle with mat black paint. (with some protection on the tip obviously). It is not really succesful though, Vision still have false detection. When a part is indeed on the tip, it detects it but with
Electronics Forum | Thu Dec 28 08:02:24 EST 2023 | vickey
To find the specific differences between the DEK Horizon 03IX and DEK Horizon 8 printers, I recommend checking the official documentation, product specifications, or contacting the manufacturer directly. The manufacturer's website or customer support