Electronics Forum | Wed Feb 23 15:07:58 EST 2005 | bobpan
Hello C.B. I am a former trainer/fse for that machine and still have a q1000 bible for fixing problems. I think the machine may need servo tuned to which there is a procedure that i would have to find. First thing to do though, is to drop the machine
Electronics Forum | Mon May 16 13:40:42 EDT 2005 | michaelmcclay
Hi C.B, I have been doing some repairs on a Quad 1000 and I am getting to know it better that I want to. My comapny is located in San Jose, CA and I can offer you on site support if you are in the area. I also had an operator "update" the configura
Electronics Forum | Mon Feb 06 13:16:49 EST 2006 | mazink
Hello BOb, Sorry, I wasn't getting your responed because i wasn't log in completlt. I sent an email yesterday which is as follow.. I have a quad machine (QSV 1 PLUS) here and I been having problem with it since 2 month. massege keep coming says 1) B
Electronics Forum | Mon Feb 06 19:56:07 EST 2006 | bobpan
Ok....that is very vague...but here is the approach i would take. 1. rename permanen.tbl file and reboot 2. rename calibrat.arc file and reboot * both files are located in c:\2kla\gui\guiqsv1* If it fixes the problem....it was a software issue. 3. If
Electronics Forum | Wed Feb 23 16:20:57 EST 2005 | JB
We also ahve GSM's and paste on the nozzles is not an issue here. my question would be: Why is paste getting on the nozzle? The nozzle should only come into contact with the surface of the component being placed, not the paste. If that is the case
Electronics Forum | Wed Feb 23 17:31:33 EST 2005 | Brent Robinson
Nozzle size is probably the main issue, but it could be a problem with the vacuum level too. Vacuum level should be a minimun of 20 in HG. Also verify that you have 85 PSI going into the machine. A lot of times, the paste in the nozzle is due to t
Electronics Forum | Sun Feb 27 17:30:19 EST 2005 | pmdeuel
I�m sure the 10MPF is not a correct nozzle to use. I don�t have manuals handy so I can�t answer as to the correct nozzle. We use a HSP 4792 to place all of our passive parts so I have never given this much thought. But the machine will not try to pla
Electronics Forum | Mon Feb 28 01:01:10 EST 2005 | //jh0n.
Actually, in thinking about what someone else had posted - I'm willing to bet that it's not that I'm losing parts and the nozzle is actually touching the paste, but more that since the nozzle peeks over the sides of the component slightly, especially
Electronics Forum | Thu Feb 24 12:08:15 EST 2005 | siverts
Checked the condition of your nozzles? Vacuum ok? Dummy part picked from the same feeder position? Dummy part picked from the very same feeder? How often does this problem occur? How many dummys did you pick for comparison? Sometimes a feeder calibr
Electronics Forum | Mon Feb 28 08:47:20 EST 2005 | ianlg
Hi If this keeps happening after printing just a few boards then the problem will probably lie with the actuator which could be starting to tighten up. If you give Graham McDonald at Reprint Ltd a call he can assist you to pin this down for you. Gra
