Electronics Forum | Thu Apr 07 20:16:23 EDT 2005 | davef
Q1) Simple way to measure the PCB warpage A1) IPC-TM-650; Method 2.4.22 Bow & Twist Q2) What is the maximum warpage can the SMT machine allow the to accept and place the component without problem. A2) That depends. IPC-A-610 Acceptability of Elect
Electronics Forum | Sat Apr 09 23:14:36 EDT 2005 | MikeaJ
In response to the post concerning the UP1500, the case is a little different. The Speedline/SMTech passwords are hardcoded into the Sigpro.exe file. Here is what you need to know: Login name: Speedline (or SMTech) Passwords are listed in order of ri
Electronics Forum | Thu Apr 14 06:54:02 EDT 2005 | teera
hi! below are the item need to check: 1)top plate condition(under screen squeegee). 2)under screen clean contact position(with stencil) 3)make sure the thickness of wiper paper not so thick(not over 6o gm)becaue it will effect the vacuum suction. 4)s
Electronics Forum | Tue Apr 12 08:25:43 EDT 2005 | davef
Q1 Can anyone explain to me what is the clean and non clean solder? A1 The trend away from CFCs has lead many users to evaluate switching to no-clean soldering processes. The term "no-clean" is actually a common misnomer when used to describe a flux
Electronics Forum | Thu Apr 21 17:46:17 EDT 2005 | Frank
Russ, Your math is right, but you are converting the wrong direction. I belive: 0201s use millimeters for specification sizes, not inches. And 01005 use millimeters for specification sizes, not inches. And it may be like that for all passives, bu
Electronics Forum | Wed Apr 13 04:09:15 EDT 2005 | simmcircuits
Hi, I need help with our MPM UP2000, the stencil and the lamp boards won't turn off completely, they are both on at the same time. Turning it on would only make it brighter, turning it off will just lose the brightness but the lamps are still on. I h
Electronics Forum | Thu Apr 14 18:28:20 EDT 2005 | darby
We use the standard supports that come with the machine. Print a 1:1 transparency of the first pass side of the pcb including mechanical outline and components. Your customer may need to supply this. Flip this over and tape it into position at th
Electronics Forum | Fri Apr 15 10:47:09 EDT 2005 | patrickbruneel
Dhanish, If I understand correct your ICT doesn't detect shorts and only measures capacitive and resistive values. The webbing as Ken mentioned would have a resistance because this is caused by a lack of flux and the web is mainly tin oxide, which w
Electronics Forum | Fri Apr 15 14:06:24 EDT 2005 | saragorcos
Shean made some good points and offered some good starting resources. Adding to what he said, I would also mention that many times, even a no-clean flux can cause contamination that requires cleaning. Our lab has dealt with numerous cases of client
Electronics Forum | Tue Apr 26 17:28:29 EDT 2005 | davef
Not sure. Try: * ScanCAD International; P.O. Box 598, 19181 Highway 8, Morrison, CO 80465-0598; 303-697-8888 F 303-697-8580 info@scancad.com http://www.scancad.com * Artwork Conversion Software; 417 Ingalls St., Santa Cruz, CA 95060; 831-426-6163 F