Electronics Forum: tin (Page 1 of 165)

About immersion tin

Electronics Forum | Mon Oct 06 09:55:35 EDT 2003 | davef

While you are waiting for others to reply, search the fine SMTnet Archives on: * immersion and tin * imm and tin

Pcb immersion tin thickness

Electronics Forum | Wed Aug 09 08:06:07 EDT 2006 | davef

See "IPC-4554 Specification for Immersion Tin Plating for Printed Circuit Boards" 3.2.1 Immersion Tin Thickness. The most common reason for solderability issues with the white tin surface coating during multiple thermal excursions is a thin white ti

Re: Immersion tin process

Electronics Forum | Thu Dec 21 20:09:01 EST 2000 | Dave F

You are one lucky person to have access to the fine SMTnet Archives. They have over a hundred threads on immersion tin, white tin, and the other variants.

White tin immersion finish

Electronics Forum | Wed Jul 29 13:44:45 EDT 1998 | David Spilker

We are investigating alternatives to HASL finishes for more dense PWBs. OSP is not a good choice because of low solid flux and possibly long shelf life. Immersion gold is expensive and so far has been more difficult to wave solder. Has anyone had

Pcb immersion tin thickness

Electronics Forum | Mon Aug 07 09:04:09 EDT 2006 | molos21

Hi everyone, I am starting to use the lead free process and I had a few wetting problems (solder did not reach top side) at the wave soldering process once the pcb had passed our smt line (one heat pass). From what I understand, I have had a problem

Immersion tin process

Electronics Forum | Thu Dec 21 15:58:49 EST 2000 | Josue Jacquez

Hi Guys! I'm looking for information regarding the Tin immersion process. Is somebody there with such info? Could you send me or explain me the process? I'll appreciate your help.

Immersion tin process

Electronics Forum | Thu Dec 21 15:57:36 EST 2000 | Josue Jacquez

Hi Guys! I'm looking for information regarding the Tin immersion process. Is somebody there with such info? Could you send me or explain me the process? I'll appreciate your help.

tin dip method

Electronics Forum | Sun Oct 01 02:35:13 EDT 2000 | Marvin Lopez

Do any of you good fellows know a good instruction manual, on the net pretaining to tin dip techniques.

About immersion tin

Electronics Forum | Sun Oct 05 06:37:41 EDT 2003 | christ

Hi all: I want to know the parameter and criterion about the process of immersion tin,could you be kindly to give me the hins about it in more detail.Thank you for your support. Best wishes christ

Matte tin finish

Electronics Forum | Wed Aug 04 16:49:24 EDT 2004 | jim_bob

Regarding Lead Free component finishes, vendors are zeroing in on matte tin plating as the finish of choice. What test are performed, to determine if a finish is "matte" type (vs. non-matte)?

  1 2 3 4 5 6 7 8 9 10 Next

tin searches for Companies, Equipment, Machines, Suppliers & Information