Electronics Forum | Sun Dec 19 10:02:55 EST 1999 | ron chua
Hi, how to ensure flexible boards do not warp after reflow and still remain flat for subsequent operations. What is the best way to hold and transport these strips from one process to another. Thanks!
Electronics Forum | Mon Dec 20 07:09:03 EST 1999 | Christopher Lampron
Ron, The simplest way to process fexible PCB's that I have found is to use a process carrier fixture. There are companies that manufacture process carriers that are capable of holding flex through stencil, placement and reflow. The carriers are capab
Electronics Forum | Mon Dec 20 17:34:17 EST 1999 | Dave F
Ron: Chris is correct that there is a bunch of fixture fabricators that make good products that will serve your purpose. Other fixture fabricators can be found in the archives. Problems with these fixtures are: 1 Out-rageously expensive 2 Very lo
Electronics Forum | Mon Dec 20 19:09:54 EST 1999 | Chris
If your flex circuit is only populated on one side, you can have the PCB vendor palletize the flex for you. What you do is have the flex circuit laminated to 062" FR4 using a thermoset adhesive like Dupont WA. Standard flex circuit adhesive. Howev
Electronics Forum | Fri Sep 04 09:33:40 EDT 1998 | Stefan W.
| I need advice for locating 23 Gull wing LED's (all in a straight line) in the x,y, and z axis for a SMT PCB. It is a Hewlett Packard LED (P/N HMLA-QH00-01). The application uses a CCD to detect the position of a ball which floats in a resevior fo
Electronics Forum | Wed Nov 16 16:15:31 EST 2022 | babe7362000
Does anyone have a better way of holding large reels for the Mycronics machine? The arms are quite expensive so I currently use an ESD bin with a rod in the middle. It's kind of a pain when you need to change a reel. I saw a really cool bin, but the
Electronics Forum | Thu Sep 03 15:43:18 EDT 1998 | Tim Flanagan
I need advice for locating 23 Gull wing LED's (all in a straight line) in the x,y, and z axis for a SMT PCB. It is a Hewlett Packard LED (P/N HMLA-QH00-01). The application uses a CCD to detect the position of a ball which floats in a resevior for
Electronics Forum | Fri May 06 08:39:59 EDT 2016 | kahrpr
The first issue I see is that you have a high potential of the 402 tombstoning.
Electronics Forum | Fri May 06 08:47:05 EDT 2016 | davef
You're correct. This design will have a record amount of 0402 rework for tombstoning and misalignments. Suggest that the pads on each end of all components be the same size in order to balance wetting forces during reflow.
Electronics Forum | Mon May 09 09:23:45 EDT 2016 | markhoch
I agree with the previous two replies. This is a perfect design....if you're trying to create a graveyard full of tombstones.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong