Electronics Forum | Wed Feb 25 11:37:01 EST 2015 | jasonnova
We have a customer with an assembly that will require potting using 3M DP-270. There is a component that needs to be covered with potting material but it is considerably higher than the overall potting height of the cavity. The low viscosity of the
Electronics Forum | Sun Mar 15 08:48:53 EDT 2015 | davef
Sure, the formulation and purpose of a soldering flux and a socket cleaner are basically the same. Off the top of my head, differences are: * Activation temperature: soldering flux [~200*C], socket cleaner [~120*F] * Compatibility with some solder
Electronics Forum | Wed Jun 17 01:02:16 EDT 2015 | armandogomez
Hello Had a similar problem way back with the hydra, first go to the service program manually activate the hydra camera then move the Xwagon to place the hydra ref plate over the hydra camera and check first if the camera works, second the image you
Electronics Forum | Wed Jul 15 11:42:24 EDT 2015 | davef
Here’s what you should try: * Go to the “Used SMT Equipment” nav tab [left margin, upper part of this page] * Click “Add Item” button [weird orangy, peachy color button, right side, near top, above thick blue line] * Complete form, making sure that y
Electronics Forum | Fri Aug 28 03:03:00 EDT 2015 | grimus
Thank you all for your advice. You are right this is two sides board, and dropped parts are on bottom side, and it is refered just to very light switches. I am using same temperature setup for top and bottom. What is interesting I am manufacturing t
Electronics Forum | Fri Oct 16 12:41:29 EDT 2015 | deanm
Do you have a solderable surface (walls)? It looks like most walls have a silver arc at the top but some do not (especially the last link) which I interpret that it has been plated (in most cases). Is it possible that the component does not have suff
Electronics Forum | Wed Dec 23 15:35:18 EST 2015 | taborheiking
So I'm in Maintenance and I've been getting a lot of component feeder magazines back that have faulty circuit boards etc and I was wondering if there was anyone out there who has made a desk top test fixture for any of the Agilis or TMD Magazines or
Electronics Forum | Fri Jan 08 15:56:37 EST 2016 | deanm
We received a contract job that requires a board with a heat sink integrated (glued onto the top layer) and the heat sink needs to be powder coated. So I need a board vendor that can provide: Multilayer board fab, Heat sink fabrication, Powder coat t
Electronics Forum | Mon Apr 18 06:17:58 EDT 2016 | smtsparescn
If there are too many components on the board and many components are standing near the board edge,to use a depaneling machine is a simple way,but a machine is needed, another possible way is to design and make a simple fixture,it holds the board fi
Electronics Forum | Wed Nov 09 10:30:26 EST 2016 | jbreit
You're right. It is BS. I should have said "the operators are only WILLING to remove so much paste manually." When I brought up my concerns about leftover paste with the powers that be, I was told in no ambiguous terms that the operators will no