Electronics Forum | Thu Jul 18 17:38:27 EDT 2019 | rgduval
Not swapping out feeders....swapping out magazines. It only works well if you have enough extra mags to load all the feeders on. And is a viable solution if your position limited on your machine. Before the advent of Aegis feeders for My machine
Electronics Forum | Thu Jul 09 11:12:43 EDT 2015 | quaker332007
We have a mydata MY100DX and A Hover-Davis label feeder. I'm have issues picking up the label. The machine will place it fine for a few then stop and refuse to pick up the label. Is anyone using this configuration and if so do you have and points
Electronics Forum | Thu Jul 30 16:50:41 EDT 2015 | lokit
In our production line we use the pick and placer My100 by Mycronics. We get a lot of feedback from quality department about IC's being placed upside down, wrong polarity. (Wrong polarity usually already delivered to us, or IC's placed in the sticks
Electronics Forum | Thu Jul 11 14:59:22 EDT 2002 | pjc
Right or wrong, Mydata has a "second user" registration fee policy in order to recieve support. If you paid the fee then you get support. If you are a re-seller and not the end-user, that may explain the treatment you are getting. If you are an end-
Electronics Forum | Thu Jul 30 17:31:41 EDT 2015 | dyoungquist
We are running a Mydata (Micronic) MY15E. The MY100 is the next generation after the MYxxE series. As far as I know, there is no way for the machine itself to check the polarity of ICs to see if 1 or more are in the tube or reel different from all
Electronics Forum | Wed Aug 05 09:41:50 EDT 2015 | kmots15
For upside down and rotated parts try using the index mark (F6) in the package database for that component, at least then the machine should look for a unique feature on the bottom and if it cannot find it the part will be rejected. For the index ma
Electronics Forum | Thu Aug 07 13:58:01 EDT 2014 | patel_daxa29
Hi All, I have generated Pick and place file from ALtium designer.I put it on flash drive and it is plugged in MY-DATA. How do i access this file in TPSYS. I will appreciate any insight. Thank You
Electronics Forum | Fri Aug 06 14:06:04 EDT 2021 | cyber_wolf
Hit the space bar when the tpsys menu comes up when booting . There is something in there that says show transducers. I think that's where you will find z-force sensor
Electronics Forum | Fri Aug 06 17:19:46 EDT 2021 | SMTA-64387687
It seems to me that something is out of calibration. I noticed that you were reinstalling TPSys. Did this start after the reinstall? Did you restore a backup of your parameters, or recalibrate the machine with new values? Try changing the tools to "n
Electronics Forum | Wed Jan 02 10:45:02 EST 2019 | tech1
Exactly how are you exporting it? You need to export it in TPsys format followed by Export PCB only
| 1 |
