Electronics Forum | Mon Dec 06 20:58:34 EST 2021 | erici
Hi victor, The power supply of the machine is giving us problems now, and so i cannot access anything at the moment. While working on the machine, the power on the machine suddenly started flickering and was causing the pc to shutdown as well. Have
Electronics Forum | Thu Dec 09 14:50:35 EST 2021 | emeto
The question is what exactly are you trying to achieve and at what cost? There is not unique recipe to answer this question, cause we don't know what product is running on this line. Sometimes very short line gives us much more throughput compared to
Electronics Forum | Fri Jan 07 16:30:53 EST 2022 | tey422
I have a quick question, what's the tallest (highest) SMT part you ever encounter? 1.5 inch or more? I have to set a depanel router's clearance height. It would need to recalibrate again every time if the spindle or camera's height is adjusted. There
Electronics Forum | Sun Jan 30 20:13:32 EST 2022 | chuckphd53
I have a SMT-460 machine that works pretty good for the most part. When placing parts I have an issue with the SOT-23 rotation 90deg. Using both Juki 503 / 504 nozzle it will pick and place all of the 0805 and 1206 resistors/caps just fine. I have 9
Electronics Forum | Wed Feb 16 23:20:40 EST 2022 | sarason
UAAA1280T is a Supervisory Circuit AIRBAG from Phillips/NXP ie voltage checking/current checking easily found in datasheet archive. TLC2274 is a Quad Low-Noise Rail-To-Rail Operational Amplifier CMD9936 could be a Dual MOSFET? What are you trying to
Electronics Forum | Tue Apr 05 20:45:36 EDT 2022 | stephendo
Try adipic acid to clean your nozzles. It is a powder and can be awkward to work with as a result. But you might end up preferring it. Also look where the substance is not. There are two PTH joints without it. And that chip cap is closer to the PT
Electronics Forum | Fri Apr 08 09:42:31 EDT 2022 | bukas
thanks for help guys. I changed HDD and mounted image from a working machine then I ran a calibration. It still moves paste left and right but distance is much smaller so prints are acceptable. I have a spare vision card will try it tomorrow. Do I ne
Electronics Forum | Fri Apr 08 17:39:12 EDT 2022 | glasscake
Does anyone know how to reset the admin password on a TOPAZ XII software version 1.22std r1.001 system version 1.5? I only have access to operator with a ?power? of 5. Ive tried opening software version, typing ilovesaftey but nothing happens.
Electronics Forum | Wed Apr 20 03:42:31 EDT 2022 | sophyluo1985
If you are currently using a Mirtec machine, then you will continue to choose this brand of machine when you replace the machine. If you are familiar with TRI, Koh young, these two brands are also good. Many clients are using them. If you need to kno
Electronics Forum | Thu Apr 28 03:58:52 EDT 2022 | erici
We are having problems with our Siemens Siplace S27 machine. The machine is giving the error - Y-axis Faulty initialization of Motor. We replaced the Y motor card and swapped also the servo control cards on the two gantries. Still will not initiali
