Electronics Forum | Fri Feb 29 09:15:23 EST 2008 | jdengler
I do not know the QSV-1, but it sounds like there is a sensor that would detect when the clamp is open. Try to find this sensor and see if it is working.
Electronics Forum | Fri Feb 29 09:51:39 EST 2008 | iantech
Guys I am trying to measure the placement repeatabilty of my placement machines, and I was wondering if you guys had any usefull excell tools you have developed along the way that might help me input the figures so my bosses can understand ian.
Electronics Forum | Mon Apr 14 07:31:46 EDT 2008 | leemeyer
Try PPM inc. http://www.goppm.com/ They sell parts & service for Quads and are very helpful with questions.
Electronics Forum | Thu Mar 13 16:17:36 EDT 2008 | vikkaraja
Does anyone know where I can try to purchase some either new or used nozzle holder. Any help will be great. Thanks, vikkaraja
Electronics Forum | Mon Mar 17 08:10:09 EDT 2008 | soudomphong
1. Check the vision gantry motor. 2. Check the cards, and trying to swap the card to see if it still having problem, if it is, then the motor itself is bad. It doesn't come cheap either.
Electronics Forum | Mon Mar 17 08:29:34 EDT 2008 | mulder0990
I couldn't see that it would be pratical at all. The older CP-6 machines need a camera upgrade to even place view the parts and you need a pristine CP6 feeder to run the part. If you do plan on trying, I wish you the best of luck.
Electronics Forum | Tue Mar 17 17:07:07 EDT 2009 | keithej2
Engineering tried it with special made .4 nozzles (which we could never get to pass a center test reliably) but the results were less than spectacular. The reject and bad placement rates were high so that idea was abandoned.
Electronics Forum | Thu Mar 20 08:46:21 EDT 2008 | mefloump
You can also try Omni-Tronics, Inc. (763) 425-2675. This is who we purchase parts from for our Paste Puck.
Electronics Forum | Thu Mar 20 15:34:23 EDT 2008 | swag
Our customer is putting our process under a microscope and is requiring that we wash all product. They want no flux residues left on the solder joints. We do not want to add anything to our DI only wash system so we're trying to find a way around i
Electronics Forum | Thu Mar 27 05:09:26 EDT 2008 | d0min0
maybe it is worth trying that one? don't understand chinese http://bbs.smthome.net/read-htm-tid-96873-fpage-2.html