Electronics Forum | Sat Jul 26 12:37:10 EDT 2014 | jimmyboz
In the future, please try to explain the situation with some detail. Usually this is the sensor on the 10th station to verify to nozzles are in the up position.
Electronics Forum | Thu Jul 31 13:52:33 EDT 2014 | jimmyboz
I do not recognize that part. Initially, lets disregard that part and try to troubleshoot. DO NOT loosen any bolts associated with the Nozzle change mechanism, else your day, will get worse.
Electronics Forum | Fri Aug 01 09:21:28 EDT 2014 | jimmyboz
Does it error during nozzle center check, if so, manually switch all holders to small, try center again. It should do about 8 small nozzle centers before error, if so this helps rule out the 10th station, if not check the 10th.
Electronics Forum | Wed Aug 13 12:06:40 EDT 2014 | deanm
Try Precision Placement Machines. I know they support and sell Camalot 5000 systems. Precision Placement Machines, Inc. 326 Main Street, Unit 11 Fremont, NH 03044 Telephone: (603) 895-5112 Fax: (603) 895-5113 www.goppm.com I am in no way affiliate
Electronics Forum | Wed Aug 20 14:38:31 EDT 2014 | kkay
Yes we were trying to run 8 at once in a pallet with no luck. Our aluminum boards are not square, they look something like a half moon shape so I don't think there is a way to panelize?
Electronics Forum | Thu Aug 21 09:01:35 EDT 2014 | jax
You should never try to print more than one board at a time if utilizing a fixture. You should have a single image fixture for the printer and an array fixture for the machines... where fiducials can be used to correct positional variations.
Electronics Forum | Tue Oct 07 08:44:49 EDT 2014 | emeto
Hi, 1. I will run the board on the mesh if single sided. 2. For double sided board, I will try stiffeners. 3. If stiffeners don't work, then you have to create a handling fixture(holds the board and has enough openings to let the air flow to the PC
Electronics Forum | Mon Oct 13 13:24:21 EDT 2014 | rgduval
Deni, Yep, we found that one the other day, too. And, yes, axis mounted is set to 1. We tried setting it to 0, saving, then back to 1 (again, hoping to clear a software flag/fault, if that's what it is). Thanks, ..rob
Electronics Forum | Mon Oct 13 18:15:38 EDT 2014 | ilavu
Hey rob, make sure you do the changer setup. That procedure looks at the fiducials on the changer and adjust the position for nozzle change. It is in system setting. Motor or amp is not easily go bad. I have machine from 92 and never had problem with
Electronics Forum | Mon Oct 13 14:51:46 EDT 2014 | vickt
Have you tried contacting Universal directly for assistance? Their tech support team can be conveniently reached at IMTechs@uic.com
