Electronics Forum | Thu Mar 20 17:26:14 EDT 2014 | dave222
I tried to check for the emitter and the receiver and I notice that the receiver is screwed into the side of the head and not easily accessible so I decide not to mess with it. this is what I did. I activated all of the clutches for the spindles an
Electronics Forum | Tue Mar 25 02:58:24 EDT 2014 | molder
ok.. thanks you so much.. I will buy new dispenser siringe, and I try to rework... I have a questions on desolder and solder a socket 1366 intel on motherboard. I have a rework station Honton hot air and tornado infrared, but i don't know a temperatu
Electronics Forum | Mon Mar 31 14:52:02 EDT 2014 | jax
Both Manufacturers and Machine Types are a good choice... Why just these two Manufacturers? Depending on your needs (Changeover times, Board Size, Part Size, Part Counts, Odd Form requirements, CPH requirements, and the list goes on), there might be
Electronics Forum | Fri Apr 11 15:14:36 EDT 2014 | superlen
CP45 as fast and error-free as possible, but it's tightly integrated to our MRP backend and not easily separated. It also doesn't let you pull back out the optimized feeder list as I haven't tried to reverse engineer the .pcb or .opt file. I've looke
Electronics Forum | Wed Apr 30 11:28:38 EDT 2014 | nhubble
If you still are considering these PoP opens a possible warpage issue I might be able to help. I work for a company that measures warpage during heating (Akrometrix). I'll try and send you a message with details. I would be curious to hear if this
Electronics Forum | Tue Apr 22 12:33:35 EDT 2014 | barryg
No we have a battery spring that is soldered directly to a PCB (standard tin plated copper PCB). The Battery spring supplier (and I have no confirmation he makes them or buys them) claims they are tin plated. When trying to solder to them it is very
Electronics Forum | Thu May 29 08:17:22 EDT 2014 | emeto
Edri, if the profile is good for this part and everything else on the board looks fine, I would focus all my attention to the part. How is it packaged? How is it handled? Moisture sensitive - prebake if needed.If nothing helps, try another batch or
Electronics Forum | Mon Jun 09 10:03:40 EDT 2014 | clydestrum
Well, typically we put rails on a lot of the boards due to the absence of fids and/or tooling holes. We do have a fixture that is somewhat universal that I could try to introduce into the next run. Unfortunately, the next run does not help my proble
Electronics Forum | Thu Jun 12 17:52:37 EDT 2014 | jorge_quijano
Update 6/12 After solder preform (SAC303 0603) I did not get good result... Couple of connectors have a guide pin that does not allow enough space for preform :( I will try with aperture size modification for my next run. What about step up stenci
Electronics Forum | Wed Jun 25 13:23:43 EDT 2014 | sarason
Try out my program PCBSynergy at http://members.iinet.net.au/~sarason/ It is designed for the Facebook generation. Once you a file that is vaguely what you want feed it into the built in software and optimize appropriately. You can do feeder re-org
