Electronics Forum | Wed Nov 24 16:08:09 EST 2004 | Terrapin Station
This depends on the model. Most machines and turret style typically overstroke .2mm with a force of 250 - 300 grams of force. the reason for the over stroke is to place the component into the paste. This can be adjusted through part library manipul
Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany
Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >
Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon
My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would
Electronics Forum | Mon Mar 21 09:33:25 EST 2005 | davef
RoHS Substance||RoHS MCV Limits||Typical Testing Approaches Lead||1000 ppm* ||Wet chemical digestion followed by ICP (Inductively coupled plasma) or AAS (atomic absorption) spectroscopy ||||XRF (X-ray fluorescence) spectroscopy Cadmium||100 ppm ||Wet
Electronics Forum | Thu Dec 21 13:11:25 EST 2006 | SWAG
We have fought with cut-tape way too much. It's always a bad idea. We've tried a couple methods/devices for manual splice with limited success. Before you look into this I would ask them if they could supply you cut tape qty's inslusive of fairly
Electronics Forum | Tue Nov 13 09:25:42 EST 2001 | davef
Maybe. While it doesn't help with your current problem, there is nothing that says that you cannot impose requirements in your purchase order that are stricter than D-300.
Electronics Forum | Wed Jun 02 15:46:08 EDT 2004 | drlou
I have been reading the forum to try and figure out what brands to look at for Pick and Place machines. We need around 3,600 cph, and would like to be able to handle 0402, soic, tssop, and perhaps as little as 0.020" pitch. Max pcb is 9 x 13". Looks
Electronics Forum | Fri Aug 03 15:20:18 EDT 2001 | stmerkt
The press release attached below provides some insight into the direction Tyco is planning to head with the Automation Group. For Immediate Release Tyco Electronics Expands Automation Group; Offers Quad Systems Assembly Equipment Quad Systems
Electronics Forum | Tue Jun 08 22:20:17 EDT 2004 | Don
Dr. Lou, I wouldn't recommend the Quad QSP series. A stated before it's old tech, and the feeders are junk. If your looking at Tyco (Quad), they have a new Mirae 1025P platform. It's very competitive performance/price against Assembleon and the li
Electronics Forum | Thu Jul 06 04:41:58 EDT 2006 | Rob
MF300S is quite an old flux, & a lot has happened since then on the flow solder front - are you sure it's designed for Lead free, or is it just a traditional flux that SHOULD work OK with Lead free?
winsouce.jpg)
