Electronics Forum | Thu Jun 10 16:23:11 EDT 2004 | davem
Hi Grant, In previous positions I've had experience with the Fuji CP43, CP6, CP642, CP643, CP65, IP3 & QP242. In operating, training and process engineering capacities. Presently, I'm working with 2 SMT lines (in a process engineering capacity) wit
Electronics Forum | Mon Mar 05 10:43:29 EST 2007 | MGC
Universal Instruments provides certified on-site training. You may contact your local UIC Sales or Service team or one of these numbers: http://www3.uic.com/wcms/WCMS2.nsf/index/Contact_Us_94.html
Electronics Forum | Sat Jun 13 00:25:59 EDT 1998 | Scott McKee
Last October I purchased a Mydata over a Phillips and Amistar. I've done things on my Mydata that is impossible on the other machines. I can build the top side and the bottom side of two boards at the same time (I print both sides at once). I can "
Electronics Forum | Thu Jun 06 07:53:51 EDT 2002 | Jim M.
Has anyone had much luck Picking and Placing die with a Panasonic MPA-G3?What special setups or considerations are required? Currently we pick and place one die with our Universal GSM using only one nozzle. The nozzle must be painted white in order
Electronics Forum | Thu Sep 19 11:14:45 EDT 2002 | Jim M.
We had lots of problems with bridging on 15.8mm pitch, QFP17-160 at the start.The board was .032 thick, double sided-six boards to a panel. Here is the problems (not neccessarily in the biggest to little but as i remember them) and solutions that he
Electronics Forum | Thu Apr 29 11:45:17 EDT 2021 | astarotf
Hello We are looking for GMS machine spare parts for our assembly line. I would like to know that you have +57 300-748-5462
Electronics Forum | Wed Apr 28 06:16:15 EDT 2021 | semelectronics
Hello, We have recently liquidated a production line, almost everything has been already sold, we just have left over 300 GSM feeders and lot of spare parts for machines. Whereever I try to sell this equipment I hear it is too old and they do not us
Electronics Forum | Sun Mar 04 01:56:37 EST 2012 | eadthem
What we have had recently is a lot of larger thin (32 thou) thickness boards that have had issues with SC90 diodes bouncing off the pads in the final PNP machine. Our setup, universal instruments GC120 or quad beam 30 spindle lightning heads. This m
| 1 |
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694
