Electronics Forum | Mon Dec 05 09:14:14 EST 2022 | peterm
Invoke. The PTF Setup Procedure dialog box displays. 4. Select Product. The Select Product File dialog box displays. 5. Select the same product used in the Open PTF Teach Product section above. 6. Enter the Slot number for the PTF and select Full
Electronics Forum | Tue Jan 08 15:53:30 EST 2019 | emeto
From the datasheet
Electronics Forum | Tue Jan 08 14:41:08 EST 2019 | jrogalski88
I am a fairly new technician with a rather large electronics assembly company. Its been an ongoing issue to pick and place small coils using our Universal SMT machines. Curious if any if the seasoned techs at smt.net have any recommendations as far a
Electronics Forum | Tue Jan 08 16:43:04 EST 2019 | bane016
Try with "120F" type part number:48503503 or 1220 1240...reduce pick up speed...
Electronics Forum | Thu Jan 24 09:50:59 EST 2019 | my3sons
We can handle this challenge. If you would like to get an RFQ on a custom nozzle, please complete our form: http://www.cotinc.com/nozzle/
Electronics Forum | Wed Jan 09 05:21:07 EST 2019 | jrogalski88
I will try this, thank you! Out of curiosity what about an 0807?? currently using an 1140 but there's still issues with that. I'm almost wondering if maybe parts just aren't sitting flat in the pocket so I'm getting pick and visioning issues.
Electronics Forum | Wed Jan 09 11:46:45 EST 2019 | bane016
Maybe you have to contact your machine support they can modify special nozzle for that component...i dont know what else you can try...or just contact your support and ask them what to do...we had a similar problem with LED diode on our machine..and
Electronics Forum | Mon Apr 17 16:22:29 EDT 2006 | jaimebc
Are there any users currently working with Unicam and Universal HSP and GSM? If so, what offline interface are you using? USOS or UCT-52. Was there any conflict between Universal's interface and Unicam? Thanks
Electronics Forum | Tue Apr 18 16:30:17 EDT 2006 | ratsalad
At my previous employer we ran HSP - GSM lines. Some sites used CIMBridge, others Unicam. We all used UCT52, not USOS, for the HSPs. At that time we had 4796's, 4791's, and USOS 4.X on our GSMs.
Electronics Forum | Fri Mar 26 06:58:06 EDT 2010 | ristikas
Hello, We have here very oftenly one error in our MPM Accuflex. I dont know who to ask about that errors... The error is „The transfer light peam interlock has been broken. Remove the obstacle from the path of the beam.“ I checked the sensors and
