Electronics Forum | Wed May 27 10:26:35 EDT 2015 | jodonoghue
hi a long shot but i am looking for help trying to source a cable from a universal rad 5 sequencer . it is the cable that goes between the interupt sensor and the i/o box .. any help would be appreciated or help on where to look thanks in advance
Electronics Forum | Mon Aug 20 05:53:26 EDT 2007 | erhard
Hello all, we are about to modify a Universal Radial 5 so the machine will be able to insert radial components with lead pitch 3.5mm and 5mm. The 3.5mm components are ELCOs which are getting inserted all the way to the component body so they sit fi
Electronics Forum | Sun Apr 14 00:04:50 EDT 2002 | lysik
Just to let all the folks no. If you register (and pay the fee) a machine with any (OEM) company in the USA You have the same rights as a new user. Companies like UIC, Gen Rad, Agilent, etc came up with these fees to discourage buying used equipment.
Electronics Forum | Thu Sep 09 11:57:22 EDT 2004 | John S
We've recently gone through a spell with a Radial 5 where various pieces of the head tooling would break. We even found a piece broken inside of the wax seal straight from Universal. To keep it running, our techs put on tooling from a Radial 2 and
Electronics Forum | Wed Sep 11 20:36:04 EDT 2013 | action_101
UIC still manufacturers new thru-hole machines. Both axial and radial insertion models are available. They stopped making the multi-mod dip inserters in '91 or '92. And parts are easily acquired for any older models, there were a ton of machines out
Electronics Forum | Tue Mar 13 07:56:19 EDT 2007 | Cmiller
Since you got no reply, I will give it my best shot but we do not have a radial inserter because they are really expensive. I would start with Universal instruments. I think its http://www.uic.com. I think they still make them in New York. TDK and Pa
Electronics Forum | Thu Aug 02 22:33:24 EDT 2007 | simsj
We've had some experience with Universal's machines as well. Aside from the mechanical problems you're experiencing, that level of control hardware is susceptible to power spikes/fluctuations. Save yourself some trouble later on and get a good UPS.
Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678
Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume
Electronics Forum | Fri Jul 20 13:57:25 EDT 2007 | fastek
Invest in some training.
Electronics Forum | Thu Jul 19 11:15:29 EDT 2007 | gmoritz
We just obtained a Radial 5 Inserter with no documentation on how to run the software or to operate the machine. All I have is some hastily handwritten notes from the limited instructions that the installer gave me. Does anyone know anyone who has