Electronics Forum | Wed Aug 14 13:24:18 EDT 2013 | eadthem
We just designate shelves with signs, PULL HERE, Move UP NEXT, MOVE UP 2nd, MOVE UP 3rd, We also keep paste in the incoming case, if it has one until its time to open it. Our operators are the ones who stock it and as long as they know they own
Electronics Forum | Thu Aug 29 11:56:21 EDT 2013 | kdc45
Sent program to a CP43 and the part data was not recognized. Machine message to power down and back up, so we did so. On power up, screen appeared with the following: OS Error Err Code 0001 Err task 0028 Err para FFFF Ex stat 0151 Err adrs CC400000
Electronics Forum | Wed Sep 11 20:36:04 EDT 2013 | action_101
UIC still manufacturers new thru-hole machines. Both axial and radial insertion models are available. They stopped making the multi-mod dip inserters in '91 or '92. And parts are easily acquired for any older models, there were a ton of machines out
Electronics Forum | Wed Mar 05 10:02:47 EST 2014 | dyoungquist
Per the TPSys Version 2.4 Software Manual: Force sensor level not within limits. * Force sensor dirty (inside Z tool holder) * Bad force sensor connection Try this: Remove the tool from the Z Midas head. Take a cotton tipped applicator (Q tip) and
Electronics Forum | Thu Mar 20 15:57:57 EDT 2014 | edwaterfall01
The numeric display number should be higher but only when all 7 spindles are moved down slightly from the full up position. The 7 spindles retract up to the Stop Bar. Each spindle assembly has a tapered hole thru it. This hole is in the block with t
Electronics Forum | Mon Apr 28 10:08:43 EDT 2014 | markhoch
Ok Machine Manufacturers... this goes out to you. When your Customer (me) spends $150K on a machine. And you show up at the facility to install this machine. Please bring the tools you are going to need to do the basic installation. Asking me to borr
Electronics Forum | Mon May 05 10:25:31 EDT 2014 | markhoch
I think what angered me the most was finding out that the FSE was going to need transportation to and from the plant every day. And I was more angered towards the Manufacturer's Sales Rep because my interpretation, though I may be wrong, was that the
Electronics Forum | Tue Feb 24 15:32:10 EST 2015 | swiese242
Hi there. I have an IP3 machine that refuses to > power up the MFU cart on side 1. I have already > replaced the I/O card but still no dice. Is > there a relay or fuse that I need to check to get > this to power up? The machine will not operate
Electronics Forum | Thu Jun 04 07:54:53 EDT 2015 | frix
Good day, Thank you very much for the response. We are currently running 0603 and larger. I don't think there is any components that got into the head. I've been reluctant to open up the glass encoder of the head - it seems that a lot of the parts
Electronics Forum | Wed Sep 02 16:47:03 EDT 2015 | curiousman
Hi all, My company recently purchased a preowned EBSO SPA 400-F, and I am trying to get it up and running. Still need to get a few other parts like a nozzle and nitrogen generator, but in the meantime I was looking to clean out the residues and oxid