Electronics Forum | Mon Jul 20 06:10:32 EDT 2009 | thanhnguyen
BTU ( VIP70A) lid will not close, during the weekend, we pop up to clean and vaccum, after done, try to close the lid, but not work. any input will be helpful. thanks
Electronics Forum | Tue Jul 28 09:29:48 EDT 2009 | christian01976
Hello! Did you test the blow off function manually with the input/output monitor? Mayba there is the wrong plug at the valve...
Electronics Forum | Wed Jul 29 08:38:26 EDT 2009 | duchoang
I am not sure about Topaz, but with Topaz XII, that problem could be the filter clogged, too dirty or installed improperly.
Electronics Forum | Fri Jul 31 17:09:55 EDT 2009 | isd_jwendell
Don't know about Topaz, but on Essemtec machine using SMC ejector, there are separate solenoid valves for vacuum and release. The connectors are identical and side by side. If these connectors were swapped then I would have the symptoms you describe.
Electronics Forum | Mon Aug 03 04:51:58 EDT 2009 | lococost
From alpha metals lead free alloy impurities bulletin: "Levels greater than 0.025% may start to slow the wetting speed and could affect the hole fill performance. If process performance is OK then levels up to 0.05% are OK."
Electronics Forum | Thu Aug 06 13:54:13 EDT 2009 | lockj69w
We have this problem typically after a PM is performed and it is usually due to too much grease on the linear guide.
Electronics Forum | Thu Aug 13 19:51:47 EDT 2009 | prasadz
Jagadeesh Rajagopalan is the expert in MPM Screen printer Servicing and he suggest to do the calibration of Z axis with PCB thickness (1.3mm)
Electronics Forum | Wed Aug 12 16:41:20 EDT 2009 | JWPlainview
Thanks for clearing that up, Dave. We've been getting a lot of inquiries citing both certifications. Just thought there might be a link between the two.
Electronics Forum | Mon Nov 28 16:02:50 EST 2011 | jcorrea
Im using the CAD5 macros but upon importing files from USB to machine im seeing a "Unexpected Data at line 1". Can some one tell me what im doing wrong. i line up my coloumns as follow. X,Y,R,Part #, Reference Designator.
Electronics Forum | Mon Nov 28 16:50:14 EST 2011 | rgduval
Edit the program in a text editor before you take it to the machine, and keep an eye on the program name (it should be right up front). I've had issues where the program name contained the path info (C:***) and this has thrown the MyData off. cheer
