Electronics Forum | Thu Dec 14 13:19:06 EST 2017 | cyber_wolf
How do you keep a standard foot strap from riding up on the top of your foot when wearing dress shoes ? The stretchy part rides up past your shoe laces and ends up contacting the top of your foot which becomes uncomfortable quickly..... I know ther
Electronics Forum | Fri Sep 14 07:46:34 EDT 2018 | charliedci
If it is "wondermask" made by Techspray, it is supposed to be water soluble. It being overcured (we have experienced this before), water will not touch it. We used acetone which softened it up to remove it with an orange stick. We apply it ourselves
Electronics Forum | Fri Feb 01 07:21:32 EST 2019 | dfl
One of my 8mm feeders is blinking the red led after the pick-up. With both buttons the motor works as expected (forward/backward), but after the nozzle pick-up the motor moves forward and then the red led blinks. pressing the buttons the green led l
Electronics Forum | Mon Dec 09 16:05:22 EST 2019 | slthomas
All termination platings are not created equal (sic). Some parts put up more of a fight against wetting than others, and in those cases you really have to dial it in. It seems like that in most of those cases I end up reducing the temps in the midd
Electronics Forum | Thu Feb 13 04:04:36 EST 2020 | nizar
Hi Tommy, Thanks for the reply. We use chuck nozzle and grip the dimm connector body to pick up. The concern is; we do pick up 2 same connector but different component size (height and width) due to different company. So, we create two different
Electronics Forum | Mon Apr 18 12:06:03 EDT 2022 | dsmith
During the initialization process, the table will make small movements up and down, and occasionally go all the way up and back down again, then continue to bounce up and down maybe an inch of travel, it never completes initializing. I wasn't operati
Electronics Forum | Thu Sep 28 11:15:40 EDT 2000 | pr
We had the same problem and after watching it run for a while we noticed the paste always pulled up on the blade that made the first stroke. We got rid of the problem by using less paste (about a finger width) and flattening the paste out before the
Electronics Forum | Mon Aug 09 15:30:55 EDT 1999 | Dewey
Greetings, Would like to buy a 3 phase UPS for our Mydata TP11. Been looking and generally, sales person's point of view, 10KVA @ $10,000.00 is what they recommend. Seems a lot to me??? Called Mydata and suggested 2.2KVA per phase. I would purchase
Electronics Forum | Fri Sep 07 07:39:11 EDT 2001 | caldon
Can you confirm the components are being picked up from the feeders? If the Feeder table calibration is incorrect the components could be picked up off from the begining. This would result in 1) nozzle barely picking up the part and as the head moves
Electronics Forum | Mon Dec 15 22:05:02 EST 2003 | Sam
hi Liang, We had the same problem like you before, it happened during starts up the machine (S13) and run the production for the first or second board. We also replaced the 2/2-way microvalve of placement circuit. The problem had solved at the begini