Electronics Forum | Thu Jan 05 12:33:30 EST 2017 | rgduval
If you haven't resolved this yet, I think you're going to want to go to either the part or the package (I'm not sure which one off hand), and make sure that the hydra heads/tools are selected for placement. You'll also want the vision set to the lin
Electronics Forum | Mon Dec 26 14:04:42 EST 2016 | luciano
Hi all, I'm having some troubles while trying to set up a wave soldering machine that was working just fine until a few weeks ago. The wave soldering machine is quite basic chinese made. It's 2 meters long, has spray fluxing and a short preheating
Electronics Forum | Fri Dec 30 11:31:32 EST 2016 | horchak
First profilers are expensive and you can use temperature dots for setting up a wave. You stick them to the top side of the board and they change color based on temp. Top side temp should be around 250f or 125c when it hits the fountain. If you spra
Electronics Forum | Tue Dec 27 09:22:05 EST 2016 | sumote
If this topic is not in line with this forum then please feel free to remove it. Let me start by sating I am a 3M fan. There has not been a 3M product that I have ever thought that I was not happy with the way it preformed, and I have used many 3M
Electronics Forum | Tue Jan 24 21:15:07 EST 2017 | david_chiu
I have met the same issue before. 1st possible root cause: The dimensions of reel's each chip inserting hole are a little bigger. You need to see if the turn over issue are all happened in the same vendor's reel material. 2nd possible root cause: The
Electronics Forum | Fri Apr 14 15:12:33 EDT 2017 | mrpackethead
> When the YV100 starts up if you press a key > > during its startup you can get it to ascreen > > where it asks for passwords.. > > > How would you > get the passwords from this > Hi, > > if you haven't changed them then I think > it's "spec
Electronics Forum | Thu Feb 09 10:13:37 EST 2017 | swag
Agreed. We machine all our pallets in coolant. No dust but a big mess still results in the bottom of the CNC. You'll burn through a thousand cutters if you try it on a router table. Just doesn't seem feasible. You'd have to take like 0.020" dept
Electronics Forum | Sat Feb 25 12:01:28 EST 2017 | ttheis
I'm setting up a asymtek millenium m-cob style dispenser for the first time and running through the master offsets routine but when it attempts to find the needle in the nsz needle sensor it works in the x direction but when it attempts to locate in
Electronics Forum | Tue Apr 11 13:01:36 EDT 2017 | mrich208
Yes Sir, someone had replaced the fuse with a resistor and it had burned up. We had an exact board on the VCD. We swapped them and it worked! I am not sure how this forum works but now the machine will zero and say it's missing a part but the sequ
Electronics Forum | Mon Sep 03 21:49:26 EDT 2018 | aemery
Maybe your CMOS battery is dead! On some of these old system once the battery is drained the CMOS settings are lost, this would include the correct setting for detecting the hard drive and I doubt there is an auto detect . Try turning on the machine
