Electronics Forum | Wed Jun 24 16:05:23 EDT 2020 | kumarb
Posting a few more pix on how the 24V is sourced from our Emerald-X (Yamaha YV88X) which looks very similar to your machine. Look for the power supply connector for the dump feeder (which we bought used out of Shenzhen - working well). The green belt
Electronics Forum | Wed Jun 03 21:49:27 EDT 2020 | bboyer
Well, we finally got the machine to power up and fully boot, but now we are having issues with zeroing the axes. X, Y and Theta zero OK, and the board conveyor runs, but when it tries to zero the PWC, the rail moves to the rear of the machine, hits
Electronics Forum | Mon Jun 15 16:31:25 EDT 2020 | rgduval
You may find some wetting issues running LF HASL with 63/37, as your reflow temperatures will be significantly below the LF reflow. On fiducials...if you don't have a quote for your boards with ENIG, I would recommend at least checking it out. It's
Electronics Forum | Mon Jun 29 20:59:37 EDT 2020 | kumarb
Hi. The PCB does not look to be heavy. Suggest you try to email their staff - they are very good. Personally have worked with Scott there and he knows the VIOS software very well. https://trans-tec-america.com/contact/ We have the Assembleon Eme
Electronics Forum | Fri Jun 19 15:03:15 EDT 2020 | jmelson
OK, I am really happy with the robustness of my CSM84. I wonder how hard it would be to hack up one of these 3-phase machines to run off single-phase power? Mostly, it just feeds a big DC supply for the X-Y servos. 2 heads with ANE should be just FI
Electronics Forum | Wed Jul 01 01:25:58 EDT 2020 | jmelson
> I think the main > issue is the bend radius you can apply to tape > with deeper pockets. Right, on my Philips CSM84, on the larger tapes, I don't thread the tape through the return slot, I let it play out the front of the feeder. The
Electronics Forum | Mon Jul 13 11:33:54 EDT 2020 | spoiltforchoice
Well obviously the answer is yes. Most people would probably do it in their CAD package. If you want to use a third party tool Fab3000 does tis as well as a whole bunch of other things you might possibly want to do when processing files supplied by o
Electronics Forum | Thu Jul 16 15:22:21 EDT 2020 | jmelson
Can anybody give me some general info on the QSA-30? Is the management computer built into the machine, like on Samsung CP machines, or just a separate computer? If separate, how does the management computer communicate with the motion computer? (H
Electronics Forum | Thu Jul 23 10:14:31 EDT 2020 | robl
The odd form assemblers are extremely slow compared to the Axial & Radial UIC machines. Also there is a big cost for feeders. Key question is what is the max axial & Max radial feeder count on your biggest job and that will quickly tell you how man
Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval
+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and
.gif)
