Electronics Forum: uptime (Page 1 of 5)

Uptime

Electronics Forum | Tue Sep 24 23:10:33 EDT 2013 | jandon

Is SMT line uptime measured from 24/7 or from actual working time if working time is less than 24/7?

Re: Machine utilisation

Electronics Forum | Wed Oct 13 03:11:10 EDT 1999 | Paul Gerits

Hi Zambri, I work for Philips EMT (supplier of SMT equipment) as technical consultant and application specialist. depending on what you want to know there are several ways to calculate machine utilisation. 1) Machine efficiancy. Available uptime

Re: Excess capacity

Electronics Forum | Wed May 03 13:57:20 EDT 2000 | Stefan Witte

Mark, I guess while your machine sits idle, it could do boards. While the machine processes boards it breaks down by a certain percentage rate. I would multiply the placement rate with the idle time, multiplied by uptime divided by hundred. 10.000 (

Downtime Calculation

Electronics Forum | Sat Aug 17 07:48:43 EDT 2002 | bentzen

Hi Brandon. You should always try to optimize / "balance" your line in a way so the machine with the shortest time per placement is your bottleneck. The other machines in the line should then have a 10 - 20 sec sorter cycle time, to be able to cope

Machine utilisation

Electronics Forum | Thu Oct 07 05:24:22 EDT 1999 | zambri

I am interested in seeing how some of you calculate machine utilisation. Currently this was calculated off against the uptime. I really believe there is a better way of doing it i.e if I were to calculate this against machine's capacities. Any feedba

Server Failure

Electronics Forum | Mon Feb 15 12:35:22 EST 1999 | Clifford Peaslee

On Saturday morning, 4:00am, the server that runs SMTnet had failed. Our technicians could not obtain replacement parts until this morning. We apologize for any inconveniences that this has caused, and we are currently taking measures to better ensu

repair SRT Sierra 1000

Electronics Forum | Tue Sep 19 14:52:55 EDT 2006 | ppcbs

I use Mike McClay of Uptime for my SRT 1100 service for over 7 years now. He is reasonable. Try (408)433-0376.

Production Line Setup

Electronics Forum | Wed Jun 19 14:44:11 EDT 2002 | kenbliss

It sounds like your inspector improved quality and pre-staging your feeders dramaticaly increased uptime on your machine, thats great to hear. One cautiionary note, be careful not to flood your production area with parts off of your SMT line. With

SPEA 4040 Flying Probe tester

Electronics Forum | Thu Aug 11 15:00:45 EDT 2011 | gregcr

Hi All, We are thinking about adding a SPEA 4040 flying probe tester to our facility to add some flexability to our test capabilities. Does anyone have experience they could share on these units? I would be most interested in programming and overa

Re: Machine utilisation

Electronics Forum | Thu Oct 07 15:12:19 EDT 1999 | Scott S. Snider

| I am interested in seeing how some of you calculate machine utilisation. Currently this was calculated off against the uptime. I really believe there is a better way of doing it i.e if I were to calculate this against machine's capacities. Any feed

  1 2 3 4 5 Next

uptime searches for Companies, Equipment, Machines, Suppliers & Information