Electronics Forum: usb connector (Page 1 of 2)

Height of USB Connector

Electronics Forum | Thu Jul 14 14:31:11 EDT 2005 | johnnie8

A customer has asked us to solder a surface mount mini USB connector to a board. They need the connector housing to center on an opening in a plastic panel. The question is how much does the solder process add to the overall height of the coonctor, e

USB A Connector help

Electronics Forum | Tue Jan 29 11:37:42 EST 2008 | operator

We have a customer who is using a standard USB Type A Connector on their assemblies. They don't want to add a housing to the assembly, but want to shield the metal USB connector housing from potential shorting with surrounding electronics within thei

Usb Type A Connector Help

Electronics Forum | Tue Jan 29 11:39:42 EST 2008 | operator

We have a customer who is using a standard USB Type A Connector on their assemblies. They don't want to add a housing to the assembly, but want to shield the metal USB connector housing from potential shorting with surrounding electronics within thei

Usb Type A Connector Help

Electronics Forum | Tue Jan 29 22:48:55 EST 2008 | davef

USB Type A Connector Hood We have no relationship, nor receive benefit from the company referenced above.

Height of USB Connector

Electronics Forum | Fri Jul 15 16:27:55 EDT 2005 | davef

It depends on how much paste you put on the pads. Assuming your stencil is 1:1 to the pad and the solderability protection on the board is something other than HASL, we'd guess that your solder height is approximately 50% of your stencil thickness,

Wave Solder question

Electronics Forum | Mon May 21 15:25:51 EDT 2012 | cbeneat

I'm having an issue with a particular board we run in our wave solder. it has a USB connector with 4 pins that are 3mm x3mm square. we are constantly getting abridge across at least two of the pins, but sometimes all 4. I've run out of ideas on ho

Usb Type A Connector Help

Electronics Forum | Tue Jan 29 14:22:27 EST 2008 | operator

Yeah i don't know I have not seen the actual application. RTV was already discussed by the customer and they don't want it. That is what I was thinking too. It is poor design and they are trying to find a cheap way out that doesn't look cheap. Thanks

Usb Type A Connector Help

Electronics Forum | Tue Jan 29 16:13:49 EST 2008 | jseagle

Have something molded by a company like http://www.caplugs.com and a little glue. No affiliation with caplugs. James

USB A Connector help

Electronics Forum | Sat Feb 02 22:50:04 EST 2008 | mika

Hi, I really don't understand your customers (or yours for that matter) problem with the shield - shorting? Please explain in more detail. Placing a tape seems to me to be the worst thing you can do, in terms of life-time. In what type of applicatio

Problems with SN100C in a Soltec Delta C Wave

Electronics Forum | Tue Jun 13 09:40:36 EDT 2006 | grantp

Hi, Your right guys, and we turned off the chip wave, and most of the problem went away. It looks much better, and we are getting a slight bridging on a USB connector at the front edge of the PCB and a little adhesion, but not any where as much as w

  1 2 Next

usb connector searches for Companies, Equipment, Machines, Suppliers & Information