Electronics Forum | Fri Dec 08 18:02:21 EST 2023 | jdengler
Not sure on CP6's but CP2 through CP4 series used jigs. We now have an AIMEXIII and it uses jigs. I would bet that there are jigs for the CP6 series machines.
Electronics Forum | Fri Jan 05 16:26:54 EST 2024 | mistrthou
I haven't used one, but KISS was bought out by Nordson, and the newest version of the KISS 103 is the Cerno 508.1. Their earlier Cerno's were almost identical to the KISS 103's. Something to keep in mind if you're used to programming that style.
Electronics Forum | Mon Jan 29 13:06:48 EST 2024 | erikfriesen
A follow up, using an external vacuum pump works fine, and reduces load on the air compresssor, probably using 1/3 of the air.
Electronics Forum | Wed Mar 20 08:33:53 EDT 2024 | klauss
We all know that AI has come so far. Is there anyone who's using AI in manufacturing If so, how can AI be used in manufacturing?
Electronics Forum | Fri Mar 17 07:51:49 EST 2000 | Peter Barton
John, I have had previous experience of immersion silver coated PCB's in place of HASL coated type using no-clean processing with little or no problem at all. All of the process parameters were left unchanged. There is a very minor difference in th
Electronics Forum | Thu Feb 24 16:08:54 EST 2000 | Gary
I have the situation where we may need to use a variety of reflow temperatures. It seems that the design engineers want us to try a variety of "unspecified" pastes on the products. For example, the first PCB would be assembled using a higher temperat
Electronics Forum | Sat Dec 02 21:21:11 EST 2000 | Murad Kurwa
Our NPI division is in a same category. We assemble small quantities and lot of different set-ups. I created a DPMO charting method using Excel that we use at Post Reflow, Post Wave and Final QC. In addition, we use x-r charts at screen print for con
Electronics Forum | Wed Aug 16 05:20:29 EDT 2000 | Wolfgang Busko
Richard, take a given volume and weigh it. For your parts you have already determined the aperture opening and stencil thickness and that gives you the volume for each lead of the component. This way you should be able to determine the amount of pas
Electronics Forum | Thu Jul 20 11:51:14 EDT 2000 | Deon Nungaray
Walter, First of all, if I recall correctly you should not need a 6" leader for starting a reel on a Mydata. Mydata's have a reel leader extension attachment with a V hook at the end so you can avoid this need for a long leader. You should be able t
Electronics Forum | Tue Jul 11 13:21:30 EDT 2000 | Deborah Troxell
We use the Slimkic for our oven porfiles and run a very high product mix too. My first question is do you use the same progam for all your boards or do you run different temptures profiles for each module? How are the gold boards getting destroyed? W
