Electronics Forum | Tue Jul 22 02:44:43 EDT 2008 | tetsuo_45
Hello, We currently use HLC for our JUKI machines and we wish to load and read the HLC file (".h6h")or a machine program in an other application. Do you know a mean or a tool for reading this kind of file? Thanks.
Electronics Forum | Fri Jul 25 03:58:43 EDT 2008 | tetsuo_45
I will try this proceeding. Normally, if i can convert HLC file to text file, i will be able to use the informations in other application. Thank for your help.
Electronics Forum | Tue Jul 22 19:45:27 EDT 2008 | crashoveride
0402 on CP643 is not that good.... We use the Fuji NXT for this part. However, nozzle configuration can be edited thru machine configuration, nozzle set- up.
Electronics Forum | Thu Jul 31 14:46:43 EDT 2008 | dmiller
Soltec will come in and train people at your facility, or you could send people to their facility. I found it pretty useful in a previous life.
Electronics Forum | Tue Jul 29 07:32:47 EDT 2008 | davef
http://www.google.com/search?hl=en&rls=GGLC,GGLC:1969-53,GGLC:en&pwst=1&q=omegaMeter&start=10&sa=N
Electronics Forum | Thu Jul 24 00:50:59 EDT 2008 | yurevc
Hi. I am currently evaluating what adhesive is best to use for printing and lead free application. can anyone please recommend. Thanks!
Electronics Forum | Thu Jul 24 12:36:54 EDT 2008 | rfematt
We have a new board that requires a membrane switch. The membrane switch is a 1" stainless-steel dome. We were wondering if ENIG plating will hold for an expected life
Electronics Forum | Thu Jul 24 13:12:41 EDT 2008 | dphilbrick
I seriously doubt it. It is extremely thin and the gold's only real purpose in life is protect the nickel underneath from oxidizing. Once you wear that very thin gold off you will have exposed, oxidized, nickel and loss of conductivity.
Electronics Forum | Thu Jul 24 14:53:17 EDT 2008 | boardhouse
I would agree with Doug, Enig with this type of switch is doubtful that it will hold up. You may have to think about Electroplated Deep Gold (hard Gold) 30-40 micro inches. Regards, Mike
Electronics Forum | Fri Jul 25 07:26:45 EDT 2008 | realchunks
From what I can understand, you say this only happens on one type of BGA (?). Try baking this BGA. You may have out gassing during rework. Do you use tacky flux during rework? If so, try a different flux. And last, check your rework profile.
