Electronics Forum | Tue May 04 15:18:45 EDT 2004 | msjohnston1
Ricardo makes some good points. My idea of a dream line is one that flexible to run as a high mix/low vol and low mix/high vol. I personally like Dek printers over MPM. The new printers from Mulara look interesting but they are a new company with a
Electronics Forum | Fri Nov 13 07:03:44 EST 2009 | davef
Loco [snip] "The print mode is another consideration. Printers are designed with a squeegee bar and a flood bar. In flood mode the flood bar spreads the paste, and in print mode the squeegee applies pressure, such that the actual printing takes plac
Electronics Forum | Mon Nov 29 11:37:51 EST 1999 | cpitarys
Hello Jason, I will look for the best price and service support to start. Also request an in house trial at the vendor. Jason, are you looking to remove a no clean paste or water soluble paste? Single Chamber Equipment: Most stencil cleaners opera
Electronics Forum | Wed May 05 13:15:43 EDT 1999 | Boca
| Can anyone pls email me a typical temperature profile for wave soldering process. | | Thank you vey much. | | rdgs... | Typical depends on the processes you're developing. Key factors in my experience are flux type and requirements, component
Electronics Forum | Mon Dec 08 09:25:02 EST 1997 | Scott McKee
| I would like to hear from anyone producing high mix (~200 modules) with low volumes (5-2000 per year) using an automatic line running lot sizes in the 5-50 range. We are engaged in an investigation to invest in this capability. A view into the or
Electronics Forum | Wed Sep 08 16:00:09 EDT 1999 | Mark D.
My company is looking to perform "real time" statistical process control on our current SMT operations. I have identified the critical processes for SPC but have not had much luck in finding a system(s) that can monitor the required processes for my
Electronics Forum | Sun May 31 15:57:51 EDT 1998 | Allen
I came across your question and have a good reply for you: We have been using a system to reball our BGA's made by a company called Galahad. They have been working with Hepco for distribution. Give them a call at 408-738-1880. The system is around
Electronics Forum | Wed Sep 09 20:07:41 EDT 1998 | Dave F
| I am attempting to locate a kit to be used on surface mount equipment to determine the placement capability (CPk). Does anyone have information on where to purchase such a kit? Ideally this kit should be usable on placement equipment from various
Electronics Forum | Mon Sep 07 02:10:37 EDT 1998 | Tom Blum
Hi Dick We've built up an SMD line for low volume, high product mix over the last two years. Some thoughts: - the reflow system shall have very big thermal power and reserve that results in the same profil with different thermal masses ie products. T
Electronics Forum | Mon Oct 04 15:37:52 EDT 2004 | russ
Probably one of the "incompetent idiots" but we have 4 Samsung machines, 1 CP45FV, 2 CP20CV, and one CP40CV. I have never owned or operated a Contact Systems Machine. As far as the Samsungs We as a company have had great success with these machines
Capital Equipment Solutions - SMT | PCBA | TEST
Equipment Dealer / Broker / Auctions
113 S Main Street
Lodi, USA
Phone: 6083431779
