Electronics Forum | Mon Jul 07 00:33:12 EDT 2003 | praveen
First we have to look in to the current situiation of the SMT line.Is the pick and place machine very old and can not perform consistently. Is the board to be inspected is very dense and have lots of connectors and fine pitch comp.with lots of 0402 c
Electronics Forum | Thu Mar 21 16:38:58 EST 2002 | Fuji Spares
Does the machine come with manuals, training? - do you get a feeder setup jig with the sale, is there any spares to go with it, do you have any contacts for spares, what sort of maintenance is required - how often etc. did the previous owner do the m
Electronics Forum | Fri Apr 12 16:30:21 EDT 2002 | stepheno
If you are going to wavesolder the board after SMT you will have to epoxy the parts on instead of paste/reflow. I used to work for a company that squeeged it on. You will have to research component layout guidelines if you do want to wavesolder. If
Electronics Forum | Thu Nov 14 17:57:34 EST 2002 | jonfox
Even though I don't use them, the 3 Topaz Xi's. On larger runs, you could split the workload across all three at one time or run three different jobs(assumming feeder requirements) on the three machines. Even though you could possibly achieve highe
Electronics Forum | Mon Oct 21 18:31:45 EDT 2002 | MikeF
Mike, If your wave solder machine doesn't have enough preheat capacity you can put the board in an oven and warm it part way before you put it into the wave solder machine. This works best with a spray fluxer, as a warm board will collapse the foam
Electronics Forum | Tue Mar 04 16:02:53 EST 2003 | Dave C.
We have auto-correct funtion on our Panasonic Create CM-301 placement machines but have never turned it on because of a perceived loss of placement time when the camera verifies placement. We look at the first article and correct placemnt if needed.
Electronics Forum | Thu May 29 08:28:16 EDT 2003 | davef
Teradyne says, "How does one evaluate the competency of a particular AOI system? At the highest level, all potential customers must judge any viable AOI system using the following qualities: * Throughput must be able to match the line rate on the man
Electronics Forum | Wed Aug 06 11:08:35 EDT 2003 | lgroves
Hi Sat, I'm Larry Groves the former service manager from Samsung- The 45 is a good machine with low service problems from the field. One of the major plusses is the vision system which is really one of the most capable I have used. Cal is correct
Electronics Forum | Sat Aug 09 12:37:40 EDT 2003 | cyber_wolf
Hello all, I am just curious as to the recovery # people are using on their Fuji chipshooters. One of my co-workers insist that we should run on E-stop. I tell him that we should run on 2 or 3 times and operators should be expected to watch the dump
Electronics Forum | Sun Jan 02 02:26:14 EST 2005 | SALAH, S.T.Electronix
This machine is a peace of crap; I work on this, before I went in the business for my self Later-on I got one for almost free. But I refused the offer because the fright charge was in my opinion more what the machine worth, now I had MYDATA TP9-UFP
