Electronics Forum | Fri Aug 28 06:29:21 EDT 2015 | hich
I have a problem with placement repeatability on this Samtec connector TMM. The customer wants to use a TMM connector HORIZONTAL which has to be placed and stood almost upright and not leaning slightly forward. Anyway, does anybody else have this
Electronics Forum | Fri Sep 04 09:11:10 EDT 2015 | sumote
Who do you all use for your transformer needs? Some parts may be COTS, but for the most part custom winding would be needed. High voltage, low current AC primarily, but some DC as well. Quantities sub 1000, but with long-term agreements. Any reco
Electronics Forum | Thu Sep 17 10:18:54 EDT 2015 | huske
What model do you have? Are you working with a Midas only or Hydra as well? Are you looking for basic information on how to get started with chips and SO's? Or like how to use auto-teach or manually measuring parts and programming or more like select
Electronics Forum | Thu Sep 10 10:04:27 EDT 2015 | emeto
1. Automated optical inspection(this is a machine that checks for you using camera and software algorithms for recognition) 2. Electrical test. For any PCB a test device can be made. A standard one will look like this: Put the board in the device. Go
Electronics Forum | Tue Sep 29 11:37:52 EDT 2015 | robl
Hi Marlyn, We use durastone pallets over a wave - so areas machined out so the solder can get to the pins but not the SMT. You can also get fancy selective solder machines, but I'm guessing that as you're asking you haven't got one. Hope that help
Electronics Forum | Thu Oct 01 09:37:00 EDT 2015 | emeto
That is very sad. Having the ISO also applies more cost to your product, as you need to pay for the standard and somebody to maintain it after you have it. In the mean time your quality might get worst ;) I can sign that years back(before ISO) electr
Electronics Forum | Wed Oct 07 13:15:06 EDT 2015 | markhoch
You can most certainly use the same reflow oven for both leaded and lead-free pastes. Obviously your thermal profiles will be different, as the lead-free paste should have a higher reflow temp. As long as your oven has adequate exhaust and flux manag
Electronics Forum | Thu Oct 15 11:07:23 EDT 2015 | aj
You should do a bit of research into Mirae Placement machines.. they took over the Quad machines and built on them so your feeders may still be compatible... I only know this because I spoke to an agent last week - I have never used quad or Mirae..
Electronics Forum | Wed Oct 14 14:54:00 EDT 2015 | cbeneat
We currently have five X5's. Which we like. My only other experience with other EKRA models was, we had an X3 loaner a few years ago, and after a week of trying to use it we wanted to take a sledge to it...so in a nutshell, X5-great, X3-not so much
Electronics Forum | Tue Nov 10 00:18:52 EST 2015 | ttheis
How is a board conveyor typically configured to unload into a conveyor oven if there is no downline machine to five a ready to receive signal? Do you just use a plc to activate the machine ready signal at a timed interval? Would you perhaps do the sa
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477