Electronics Forum | Thu Aug 07 17:25:11 EDT 2008 | jlawson
With Laser centering nozzle condition in terms of slider shafts have to return to same position every time. Please check condition of nozzle and make sure slider extends to full position. If slider sticks it can generate errors as the component appea
Electronics Forum | Thu Oct 02 12:22:26 EDT 2008 | JerryS
Hello Ok there is not much info here. What you have to mae sure of is several key factors. 1. Have you entered the correct stencil thickness. 2. Are you using the stencil gerber (not the paste layer) The paste layer is usually not adjusted for ap
Electronics Forum | Fri Oct 03 15:56:04 EDT 2008 | ivanahumpalot
What type of placement machine do you have? How is the machines vision system viewing the part, body x,y only? Do you have the option with the vision system to use just the lead information? Can you use the pin itself for placement from an up look
Electronics Forum | Fri Oct 17 20:26:21 EDT 2008 | diesel_1t
If is IP-1, is using SMD2 vision instead of SMD3 (CPIV-IP3, CP6,7, etc) if so, you must use Vision Number instead of Vision type... if you're using fuji flexa just press F1 on vision number and you will se most common vision numbers depending on shap
Electronics Forum | Thu Nov 20 08:41:12 EST 2008 | grics
Good morning SMTNET FORUM!!! Its been a while since I have been on. Good to see people are out there still helping other people. I have a question... What is everyone using for Coating Dry Film thickness verification? We are using micrometers. My
Electronics Forum | Fri Jan 02 09:39:30 EST 2009 | angiewest
Adam, Our X-ray requirements are due to state requirements (WV 64CSR23) has a list 'Subjects for Instruction of Radiographer Trainees'the main headers are A. Fundamentals of Radiation Safety B. Radiation Detection Instrumentation to be Used C. The Re
Electronics Forum | Thu Jan 15 10:33:05 EST 2009 | rrpowers
One thing you must be very careful with when using Bismuth is that there is no lead anywhere else within the process, either components or boards. Lead-terminated components or hot air solder leveled (HASL) finished boards used in combination with a
Electronics Forum | Tue Jan 20 13:42:21 EST 2009 | jti
We have a Juki KE-740 I would like to use a HP-612 Inkjet printer instead of a dot matrix printer to print out the production info, is this possible, I don't see the option to load printer drivers on the menu, and the Inkjet doesn't print correctly.
Electronics Forum | Mon Feb 23 05:37:23 EST 2009 | emmanueldavid
Necoleta, PWB Blistering/De-lamination may not be due for Titanium finished threads / holders which is typically being used to draw high Shelf Life of Pallets and even flow across Auto Wave Soldering rails. There is also nothing to suspect on Liquid
Electronics Forum | Thu Mar 26 14:18:31 EDT 2009 | avery5931
What do people use to document Work Instructions? > Has anyone used ProWorks (proworksinfo.com)? Thanks guys. I'm assuming you're referring to http://www.aiscorp.com ? Checking out Aegis first, may take a couple days. Valor looks pretty interest
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477