Electronics Forum | Wed Oct 13 12:54:44 EDT 1999 | Dave F
Mikeh: You can't let that stuff get to your carbon bed. Literally, you can watch your bed die. The clay coats the carbon, entombing it. I've heard talk of using a RO filter as a front-end buffer to the recycling system, but know of no one who has
Electronics Forum | Thu Oct 14 23:19:25 EDT 1999 | Dennis O'Donnell
Water soluble masks are great in my book. After having used the latex type, I found that the water soluble will save a lot of time. I dont't use a closed loop system, but I do have a filter on my discharge line. I have not experienced any filter c
Electronics Forum | Tue Oct 12 10:24:50 EDT 1999 | Jose RG
Hi, We are in the way to evaluate different solder pastes, improve our solder paste incoming inspection steps, re-define our stencil requirements and the following questions are open. Two questions, 1- Is anybody using/requiring 1000 Kcps or more
Electronics Forum | Mon Oct 11 17:15:03 EDT 1999 | Mike H
| Just curious as to everyones thoughts on if you could chose to use F4G or an MCS-30. Which would you chose and why? | | | Larry J | |Larry, depending to your Fuji machines, if you are using any new machines like QP1 or QP2 and any other ones li
Electronics Forum | Wed Oct 17 19:01:34 EDT 2001 | scott
We have a local shop here in S-Cal. called MaskTek that invented a solder deposition process that eliminates the need for solderpaste but you still need to use "sticky" flux. They license the process to various facilities around the country. Was pr
Electronics Forum | Sun Oct 10 17:57:48 EDT 1999 | JohnW
Folk's, I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. I was wanting to do a straw poll on you guy's as to the type of resist's you are using Glos
Electronics Forum | Mon Oct 11 13:08:29 EDT 1999 | Dave F
| Folk's, | | I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. | I was wanting to do a straw poll on you guy's as to the type of resist's you are us
Electronics Forum | Thu Oct 07 14:40:31 EDT 1999 | Carol Zhang
I have a board, 4 spacers needed to be soldered on the board first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, there will be no p
Electronics Forum | Thu Oct 07 15:39:59 EDT 1999 | Carol Zhang
| I have a board, 4 spacers needed to be soldered on the board | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, there will b
Electronics Forum | Thu Oct 07 15:15:31 EDT 1999 | Charles Morris
| | Our first article inspection after machine placement can take several hours depending on the complexity of the board. The operator visually checks the board against the drawing and bill of material. I'd be interested to hear if there are any othe
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477
