Electronics Forum | Fri Dec 17 15:26:48 EST 1999 | Victor Salazar
We use a homeplate design with 80% coverage on the tab, and 100% coverage on the leads 6mil stencil. All of our stencils are laser cut electropolished. We have had good success with this.
Electronics Forum | Fri Dec 10 02:26:16 EST 1999 | Tracy Guo
Hi, I'm facing smear after printing on DEK288 using reverse squeegee at the edge of panels. I've checked the fixture, printing parameter, stencil, solder paste. What else can I do?
Electronics Forum | Thu Dec 09 13:41:13 EST 1999 | JAX
IF YOU READ FIDUCIAL MARKS THAT ARE PARALLEL TO EACH OTHER THE PLACEMENT WILL NOT BE AS GOOD. ONE OF THE PROBLEMS WITH THIS METHOD IS IT COMPLETELY THROWS OUT THE CONCEPT OF BOARD STRETCH IN ONE AXIS. THE OTHERS MAY VARY DEPENDING ON WHAT MACHINES YO
Electronics Forum | Mon Dec 06 10:53:42 EST 1999 | Ron Lahat
Our CEM running No clean process on our PCBAs Should we verify that he is using the Deionized water rinsing or is it a default in the process ?
Electronics Forum | Sat Dec 04 09:46:25 EST 1999 | Chris McDonald
We had a simular problem We used EMC GLobal Technologies. Basically had carriers mad for small cards. It worked well and we could reflow and wahs the pallets too.
Electronics Forum | Tue Nov 30 12:05:24 EST 1999 | Wolfgang Busko
Hi, you could try "www.streckfuss.com". I can�t imagine what is meant by "fairly inexpensive". That kinda stuff you can get used, maybe someone does have one of these dustcollectors laying around. good luck Wolfgang
Electronics Forum | Tue Nov 30 18:33:05 EST 1999 | Brian W.
I have used Loctite, RTV3145, or Tak-Pak to secure the wire. As John said, the wire is usually secured to the board near the lifted lead, and usually at 1/4 inch intervals along the way. Brian W.
Electronics Forum | Mon Nov 29 10:35:32 EST 1999 | Jason Birch
Gentlemen, Can anyone recommend a stencil cleaner manufacturer? Are there any advantages to using ultrasonic vs. high pressure? I am also looking to clean misprinted boards with the machine. Thanks, J. B.
Electronics Forum | Tue Nov 30 12:57:25 EST 1999 | Larry Johnson
Okay guys... The SMT Forum is not used to communicate with one another YOU GOT IT!!! You are all going to get his kicked off of this thing!!!! Smiles Larry J
Electronics Forum | Tue Nov 30 14:52:20 EST 1999 | EmJay
Also on the CP-6 if you hit (F5) (F5) while the start button is blinking it will keep the turret from doing a nozzle origin search. Which is useful when.....Larry?
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477
.gif)
