Electronics Forum | Wed Dec 06 11:00:30 EST 2006 | jdengler
All of the IP-1's I have seen use a fixed feeder bank. No MFU's which is where the board is located for IP-II's. Jerry
Electronics Forum | Wed Dec 06 08:09:51 EST 2006 | haviland
Brad---Good morning from cold, under 12" of snow Lake Geneva, WI. Contact your new &/or used equipment guy who should know several lease companies that that provide financing.
Electronics Forum | Wed Dec 06 06:09:02 EST 2006 | Loco
Would say about the same as above, 8mm according to a cookson presentation we had, of course it would depend a bit on the paste you are using.
Electronics Forum | Fri Dec 08 00:02:35 EST 2006 | Jack
Hi all, I found this article (Dealing with "the black pad defect)about reworking bare PCB with black pad symptom...Use HASL to treat black pad..Have you guys try this before?? www.smta.org/files/SMTAI01-Jay
Electronics Forum | Wed Dec 06 14:06:55 EST 2006 | chrisgriffin
Most MPM's have a DOS operating system only, no windows. Most newer trackball drivers are installed in windows. I haven't had much luck using new trackballs because of this. You can probably find a logitech marble plus on ebay.
Electronics Forum | Thu Dec 07 14:17:03 EST 2006 | russ
I would bet that it is a SMT adhesive used to ensure that the BGA does not move during a secoindary reflow prcess. this glue is easily removed with a soldering iron. Russ
Electronics Forum | Thu Dec 07 18:13:13 EST 2006 | russ
Just had anopther thought, what type of parts are you using on this board? You may want to try a thin stencil like 5 mil or so this may help you. also can this "tilt" be from a movement during reflow? Russ
Electronics Forum | Fri Dec 08 11:30:19 EST 2006 | ganoi
We discussed about applying 2 dots of glue on either sides of the LED body, but have yet to try it out. Other discussions include conductive adhesive, using fixturing with weight, different stencil aperature design, hand soldering.
Electronics Forum | Thu Dec 07 21:06:20 EST 2006 | davef
You can put Mantis ISIS Microscope Eyepieces on most microscopes. Why not: * Buy good used microscope * Add Mantis ISIS eyepiece Alpha stereo microscopes are good, but there's plenty of good stereo microscopes out there [eg, Nikon, Olympus, Bausch
Electronics Forum | Mon Dec 11 08:52:11 EST 2006 | beta
Hi, I checked out your component.They are differnet dimensions. You say you are not using the recommended overprint ? if this is the case, I would imagine that is your problem. If you want to contact me off line to discuss further plesae feel free.
World Equipment Source has over 20 years experience in Electronic Assembly Equipment. We will resell your equipment by utilizing our global market of associates.
Equipment Dealer / Broker / Auctions
8655 Production Ave Suite B
San Diego, CA USA
Phone: 858-693-1991