Electronics Forum | Thu Jul 23 13:28:55 EDT 2009 | pnguyvu
Hi PPM! Have your stencil house mark fid with laser machine - that how we use to have fid mark once it marked with laser it last very long time like stencil's life. Good luck! Steve USA STENCILS INC
Electronics Forum | Wed Jul 15 12:44:11 EDT 2009 | thanhnguyen
The Tant size is 3528-21. I use type 72 nozzle > for it. check your vacuum valve, manually turn it on and off,i have the same problem like that b-4, after replacing the vacuum valve, the problem went away.
Electronics Forum | Thu Jul 23 13:10:29 EDT 2009 | sys_steven
Remember as well, the Mirtec machines have laser technology being used to check for coplanarity/lifted lead issues. Having this capability will reduce false calls in most circumstances.
Electronics Forum | Thu Jul 16 22:03:46 EDT 2009 | azhiker
Hello, We have a DEK 265 we will run our boards front justified with relation to the stencil, can anybody give me an offset that you are using to order your stencil when the image is in the front? Thanks
Electronics Forum | Fri Jul 17 12:07:14 EDT 2009 | azhiker
See attachment. Hope it is useful. DucHoang, Thanks for the info. This is exactly what I was loking for, since I didn't have a DEK manual with me. Thanks a lot!
Electronics Forum | Fri Jul 24 02:57:05 EDT 2009 | fede
I use Center Edge, and adjust stencil offset. It's very easy, you just have to give it the PCBs width. An other advantage is that If your PCB has scrap strips, and you lose them, or PCB changes, you can print it anyway.
Electronics Forum | Tue Jul 21 06:23:07 EDT 2009 | Jeff
Instead of using a conversion box just make your own cable. Look in the Dek manual, volume #2, chapter 18. It shows you how it's wired. Easy to make and looks allot cleaner than those conversion boxes.
Electronics Forum | Sun Jul 26 17:13:31 EDT 2009 | slthomas
Is it possible that the assembler is using solder wire that's too small for the application and feeding it too quickly to compensate?
Electronics Forum | Fri Jul 24 10:08:05 EDT 2009 | jdengler
Possibly, if you want to sell used equipment you should have a competent technical staff! Jerry
Electronics Forum | Fri Jul 31 17:09:55 EDT 2009 | isd_jwendell
Don't know about Topaz, but on Essemtec machine using SMC ejector, there are separate solenoid valves for vacuum and release. The connectors are identical and side by side. If these connectors were swapped then I would have the symptoms you describe.
We are a global electronics manufacturing Solutions provider ....Our company supplies new and used SMT equipment, spare parts, consumibles, ESD supplies and services to a wide range of EMS companies.
Equipment Dealer / Broker / Auctions
Parque Industrial Nogales No. 5297 Zapopan
Jalisco, Mexico
Phone: 523316044491