Electronics Forum | Thu Jun 10 20:20:30 EDT 2004 | M.L. Feather
Is there a way to have one nozzle on the HSP Chipshooter 4796 to use a higher force of vacuum than the other nozzles? For instance, an 8x4 embossed feeder has components that are wedged hard into the plastic and cannot be pulled out with regular vacu
Electronics Forum | Sun Feb 27 21:39:26 EST 2005 | smtuser1234
First thing is you should be using a 08MPFX nozzle for a 0603 part if you are using a flex head. Then to check the vacuum you should have received a vacuum gage with a nozzle tip that fits on to your spindle and then you turn on the vacuum in diagnos
Electronics Forum | Mon Jan 08 03:16:12 EST 2007 | oswald5087
hi' i need advise on immersion gold PCb shelf life. 1) what is the issue shelf life or expire for Immersion gold PCB? 2) How long we can keep the PCB? (with vacuum seal and without vacuum seal) 2) iF PCB expire, can we bake the immersion PCB? what t
Electronics Forum | Wed May 16 13:02:12 EDT 2007 | slthomas
Moisture barrier bags are polymer coated foil so are nearly gas impermeable. There's always some coating left at the weld (or it wouldn't stick) so they're not completely sealed but that's as good as it gets. Usually people use the vacuum to remove
Electronics Forum | Wed Jun 18 07:58:23 EDT 2008 | davef
Hi Stu Some seem to believe that vacuum baking will suck moisture from components and boards. Actually, the case is just the opposite. * Without proper definition and control of process parameters, vacuum baking retards the removal of moisture * Eve
Electronics Forum | Sat Mar 11 08:53:44 EST 2017 | tch
My company is looking for a vacuum that can handle being used to clean up solder splashes on the bottom of our wave solder machines and around the solder pot area in our ERSA Selective Solder Machines. In the past we would use a Shopvac but these don
Electronics Forum | Wed Sep 04 14:12:26 EDT 2019 | bobpan
It sounds like the vac-verify is not working. There is a command on the hht to turn it off. When turning off your hht will show either 'idle' or enter command' without the V showing anymore. Maybe try the cntrl and vacuum or shift and vacuum. If its
Electronics Forum | Tue Jun 01 12:48:49 EDT 2004 | pjc
AP25 can handle warped boards to a degree. I also depends on the board clamping system on the machine. There are three avbl. First is Universal Vacuum box, second is dedicated tooling with vacuum and third is Y Snugger tooling that does not use vacuu
Electronics Forum | Wed Feb 08 22:15:39 EST 2023 | stephendo
Careful with the term "vacuum sealing". You do NOT want vacuum in the MBBs. If you take out too much air you can create pockets where the moisture gets trapped. Also you can cause corners to pierce the bag. And you can even cause moisture to be pul
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800