Electronics Forum | Fri Apr 20 13:25:46 EDT 2018 | emeto
This one should be easy. 1. Check your nozzle - make sure you use the right nozzle and the nozzle tip is not damaged in any way. 2. Vacuum suction going to the nozzle should be measured/checked.
Electronics Forum | Sun May 06 21:06:59 EDT 2018 | jimpat
Thanks for the feedback. I was looking into solder pastes and saw some advertised specifically for low voiding by Indium and another supplier. This is customer driven - requesting voids in the single digit percent for components with thermal pad
Electronics Forum | Tue Jul 10 13:01:02 EDT 2018 | john22hendy
Looking for any Preventative maintenance steps for SMD storage towers. The MyCronics Owners manual does not specify PM suggestions, however proper vacuuming, lubrication and lens cleaning is necessary. Does anyone have other items to suggest or a li
Electronics Forum | Fri Feb 01 07:38:38 EST 2019 | scotceltic
What do people recommend for PCBA Depanelers/routers. Need to have the following: Inline China support (Shanghai area), Chinese language capable, Grippers/vacuum nozzles to pick individual boards from panel to designated area. Thanks
Electronics Forum | Wed Jan 22 07:05:11 EST 2020 | dontfeedphils
Just make sure they're in different parts of the bag before vacuum sealing. After the bag is sealed, neither will be going anywhere (unless your sealer isn't up to snuff and the bag leaks).
Electronics Forum | Wed Jan 22 08:25:27 EST 2020 | dontfeedphils
I don't believe it does, but don't quote me on that. Vacuum sealers can be had for pretty cheap.
Electronics Forum | Thu Jan 23 07:41:32 EST 2020 | stephendo
Too much vacuum can be very bad. It can create isolated pockets where the desiccant can not do anything. It can poke holes in the bag at corners. It can even pull moisture into the bag if too strong.
Electronics Forum | Mon Feb 10 17:32:59 EST 2020 | SMTA-Alex
Check that the new vacuum tubing isn't restricting the theta rotation. It can "wrap" around the Midas head, if not secured properly.
Electronics Forum | Fri Feb 21 17:12:43 EST 2020 | SMTA-Alex
Have you performed the maintenance? It might need grease, or there might be excess old grease, that's putting more friction on the Hydra Z. Check if there might be interference from the vacuum tubes or wires.
Electronics Forum | Mon May 17 10:59:02 EDT 2021 | kumarb
Hi. Have an Emerald-X machine with FNC purchased refurb from Assembleon with mixed results at 3500 hours. Had it sitting idle for years due to assorted issues after their installation. Only now after much time and parts investment have the machinery
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800