Electronics Forum | Thu Aug 30 11:11:43 EDT 2007 | slthomas
I think you can reach that screen with SH SET command, then do a SET [command name] [value] to change it. Make sure you write down the original values somewhere or do a print screen of your current settings before tweaking them, though.
Electronics Forum | Wed Apr 08 04:29:14 EDT 2009 | kircchoffs
Hi Rodrigo, is your problem occurs only at 2nd device table? how about if you transfer the feeders to the 1st device table? if it happens at both device pls your part data if there's a value at pick-up. you can also check the proper data of the de
Electronics Forum | Tue Nov 03 09:32:57 EST 2009 | valeo
Hi all, I'm today looking for adhesive specifications on SMT process (by printing). The Glue printing process is new in my company, and I need info, please!!! Do you know specifications about Shear component value with gluing process (on component
Electronics Forum | Fri Sep 14 13:00:28 EDT 2012 | mark25y2001
Try to check encoder if properly locked, also check encoder connector if properley inserted, if all good, it's possible that the conveyor controller or encoder problem... to check controller related just try to set in zero value, then if conveyor are
Electronics Forum | Fri Feb 19 15:23:31 EST 2016 | ttheis
RESOLVED I adjusted the "Minimum Board Width" in the Board Handling Configuration to resolve this issue. I set the lane width to a larger value which did not hit the front limit and measured the difference between the actual lane width and the set l
Electronics Forum | Tue Jul 12 10:33:24 EDT 2016 | dontfeedphils
I'd start by checking and reteaching the nozzles (this is automatic, it'll measure the nozzle length and vacuum values for each nozzle). After that double check the value you have entered for the PCB thickness as this will impact where the machine t
Electronics Forum | Wed May 03 02:23:11 EDT 2017 | Rob
Many years ago (20+) we did this by preassembling the 2 parts into a mini leadframe with high temp solder paste, which was a pain but then they could be dropped in trays, surface mounted and hit the line clean. I'm guessing you have a low value cap
Electronics Forum | Mon Oct 09 13:41:20 EDT 2017 | dleeper
developing a reflow profile is about balancing two variables, time and temperature. If its too hot, you damage parts, if its too cold, the solder won't melt. If the belt speed (time) is to rapid your temperatures will ramp to fast, if its too slow, y
Electronics Forum | Tue Jan 29 10:17:02 EST 2019 | bane016
I want to know how you measure capacitance and resistance to 01005 components?Is there such a machine for automatic measurement of component values on PCB? We have a lot 01005 components and we lose time to measure first panel components...I'm inter
Electronics Forum | Fri Jan 17 09:34:22 EST 2020 | emeto
It looks like you have a simple version of the Horizon. You should have a scale on the right side with a stopper. When you create a new program you will define where the stopper should be. I used to same this value in the program description field, s
