Electronics Forum: vcd_8 (Page 1 of 2)

EXM-10A driver

Electronics Forum | Fri Jan 16 17:08:35 EST 2015 | travishemen

Yes, both the radial 8 and the VCD 8 run on OS2.

VCD 8 6241 loosing 5 volts supply

Electronics Forum | Mon Jan 25 17:13:53 EST 2010 | bing007

I am working on a vcd 8 with a problem of loosing the 5 volts supply. We have fitted a new supply that also provides the 15 volts. When we remove the connector on the power chassis for the 5 volts the power supply shows OK. When fitted the 5 volts is

Through Hole Machines

Electronics Forum | Wed Feb 09 10:51:12 EST 2005 | primus

We've got two Universal 6360 series VCD/Sequencers, much older than the VCD 8s out there now. They work AWESOME, provided everybody knows what they are doing. They are not difficult to operate or maintain. When everything's set up right, these things

VCD 8 6241 loosing 5 volts supply

Electronics Forum | Fri Jan 29 10:53:13 EST 2010 | jeffharley

There are pots on the board in the power supply to adjust the voltages after the machine is powered up. The location of these pots are in the munual supplied with the machine

VCD 8 6241 loosing 5 volts supply

Electronics Forum | Fri Jan 29 12:59:47 EST 2010 | remullis

Something on the 5v side is pulling it down. I would check every thing associated with the harness you are disconnecting. Your shorting somewhere! Don't have a schematic in front of me. Also look for leads getting into the backside of your connecto

VCD 8 6241 loosing 5 volts supply

Electronics Forum | Wed Feb 03 18:29:46 EST 2010 | mika

4.85 V - 5.2 Volts. That is on the computer power inlet, Not the on the power supply. /Best Regards

through hole today

Electronics Forum | Wed Sep 11 20:47:50 EDT 2013 | action_101

I forgot to mention the new vcd and radials go for around $230,000 each with only 20 stations. You can buy nice used vcd8 and rad8's between $60,000-$75,000.

EXM-10A driver

Electronics Forum | Fri Jan 16 15:29:48 EST 2015 | travishemen

We are trying to network our Universal VCD 8 and Radial 8. I have everything I need except for the driver disks for the Radisys EXM-10A network card. Does anyone have a copy they would be willing to share?

EXM-10A driver

Electronics Forum | Fri Jan 16 16:59:31 EST 2015 | dilogic

We do not have such machines, only GSM's but network card is the same. Is Radial (VCD8) running on OS/2 too?

VCD 8 6241 loosing 5 volts supply

Electronics Forum | Mon Feb 01 14:04:12 EST 2010 | bing007

Found the problem. Thanks for the pointers. I had set the voltage to 5.00 volts as it was reading 4.86 volts. I still had the problem. A slghtly burnt wire going into the spade connector on the back of fuse holder 12 (5 volts). The reason the voltage

  1 2 Next

vcd_8 searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

High Precision Fluid Dispensers
Void Free Reflow Soldering

Software for SMT placement & AOI - Free Download.
Void Free Reflow Soldering

Best Reflow Oven
SMT spare parts

Low-cost, self-paced, online training on electronics manufacturing fundamentals