Electronics Forum: vectra solder pot alarms (Page 1 of 1)

Vectra Question

Electronics Forum | Fri Aug 04 16:11:59 EDT 2006 | chrisgriffin

Hell Doc, This is an easy one. But first I must disagree with the wave master. I have done extensive refurb. jobs on Soltec and Vectra. The only thing Soltec has on Vectra is a better solder pot, and even that is close. Vectra software is many, m

Solder wave

Electronics Forum | Mon May 14 13:56:54 EDT 2007 | jdumont

Agreed, I just bought a Electrovert Vectra Elite and have been very pleased with it thus far. I got the dual pot option for lead free changeovers and that has worked great. I can change pots in under 5 minutes, not counting the time to warm up.

Changing a wave over to lead free

Electronics Forum | Thu May 18 16:10:18 EDT 2006 | adlsmt

We did a tin bath on ours but it was provided for free by Nihon Superior so that is a no-brainer. It was better than taking a risk of having to dump the pot. If you cant get a free tin bath, then you should probably go ahead and fill it half way or s

ERSA versa as alternative to wave soldering in low vol high mix

Electronics Forum | Thu Sep 01 01:07:08 EDT 2005 | cmiller

We have a dual pot machine. The fluxer is not the slowest part of the process on most boards. However, we looked at running boards that had many hundreds of TH leads that we currently run through the wave in order to try not to buy a wave for lead-fr

Solder bath eruptions

Electronics Forum | Mon Mar 07 22:23:40 EST 2005 | mrduckmann2000

Ken, You nailed it! We have a Electrovert Vectra wave solder machine that will erupt solder all over the place while heating up, we had to disable the timer because of all the solder splatering. Electrovert told us that our machine had a small des

Wave replacement : Ersa, Seho, Electrovert or other

Electronics Forum | Fri May 11 09:17:12 EDT 2018 | charliedci

I have used a 2006 Electrovert Vectra ES (63/37) for last 3 years, we acquired it used. It had little or no maintenance before we got it, now after replacing a solder pump motor, preheater fans and thermocouples it is pretty reliable. The spray fluxe

Ersa Versaflo

Electronics Forum | Wed Jun 01 19:31:03 EDT 2016 | marcelll

Strange problem with a Versaflo selective wave Very long for the pot to reach is set temperature ( 5 h ) At 180 C, the pump doesn’t seem to start like it should be So very long to heat the bottom of the pot Finally, the bottom element is turning on

Leadfree dip soldering

Electronics Forum | Thu May 05 03:22:38 EDT 2005 | Hannu

I do not mean big, heavy transformers but rather small ferrite core transformers, with ferrites in the range of EF16 .. EF40. The weight of the lead and its percentage of the total weight is not the issue here. We simply do not want lead-containing t


vectra solder pot alarms searches for Companies, Equipment, Machines, Suppliers & Information